High temp spray adhesive?

[dlundblad]

Lots of options online. Anyone have any recommendations?

The foam insulation/ sound barrier in my Generac standby is falling off and basically resting on the engine.

I’m guessing a spray would be better since it’s a foam, but perhaps a brush on type would be less messy.

 

[dlundblad]

Got some snootage action too.

 

[brianl703]

I'd use a polyurethane adhesive. They are chemically curing and very heat resistant (they won't melt).

http://www.titebond.com/product/adhesives/ee174e63-cb40-43f3-b8ca-598419ee3601

 

[Rand]

if you want spray 3m "90" high strength would probably work.

 

[HankHill]

Wow, all the foam like yours appears pretty **** expensive.. Regular spray foam apparently does not have very good sound reduction properties. Can you just buy a highly rated, probably 3M spray adhesive rattle can and glue them back on? Like the product below?

specs:
https://www.3m.com/3M/en_US/p/d/b40069424/

Lots of different online stores have it for around $18 or less, Amazon has it also:
Amazon 3M 90

 

[HankHill]

if you want spray 3m "90" high strength would probably work.

Beat me by one min