Fuchs GT1 0W20 - 4,299km - 2010 Honda CR-V 2.4L

Status
Not open for further replies.
Joined
Nov 7, 2008
Messages
57
Location
Townsville, Australia
Sample 1 - Factory fill - 1,145km - OCI 7 months
https://bobistheoilguy.com/forums/threads/factory-fill-1-145km-2010-honda-cr-v-2-4l-petrol.154887/

Sample 2 - Fuchs Titan GT1 0W20 - 4,299km - OCI 6 months

CR-V2.jpg


-------------------
Comments on report:
Wear metals are within acceptable limits.
Particle contamination is high mainly due to dust particles which could lead to increased wear.
Monitor wear and contamination next sample.
------------------
Driving Conditions:
20% City 80% Highway driving
Fuel economy:
Trip to Brisbane (1100kms) fuel economy: 9.0L/100km
Return trip (1100kms): 8.6L/100km
Trip to Mackay (400kms): 8.3L/100km
Return Trip (400kms): 8.1kms
Additional notes: As Honda don't recommended 0W20 over there so I let them put whatever the service department uses in it but when I get it home I change the oil and filter out, so there will be residual additives from the dealership change.
------------------
Refilled with: GT1 0W20
Filter: Honda
OCI: 6 months (Honda interval)
 
Was this the latest XTL version of this oil?
This is a heavy 20wt oil (HTHSV 2.75-2.80cP) and being VII free
won't shear so it is not as light as the Honda Brand 0W-20 oil that's spec'd in Japan, NA and EU.

No TBN? You could likely have run this oil much longer as it is a long drain oil.

Since this ester based oil contains no Zn the 146 ppm of Zn is a carry over from the FF.
What I find interesting is the Phos' level or where it comes from since no ZDDP is used? Maybe JAG could comment on that?
 
Status
Not open for further replies.
Back
Top Bottom