Fixing my Hein Warner Jack caster?

[JHZR2]

My Hein-Warner Jack, owned for nearly 20 years. Never was a huge fan of the casters, because on the nut side of the unit (long bolts running through the body), the caster wouldn’t turn all the way.

But I’ve dealt with it for 20 years. Recently it got really bad. I think my wife clunked this one into another jack I have. That’s all I can guess. It’s the bearings, they’re screwed up.

You can see the balls go 1.5-2 wide in the track and then jam. Can bend that upper cap and get them to stay in line, or what do I need to do in order to fix them?

I think the replacement casters are plastic, not metal. No thanks. Unfortunately I don’t recall which model this is to find parts. It’s a painted blue metal wheel.

Is this fixable? Bend it and spray some grease in there??

 

[Rand]

something like these?
https://www.ebay.com/itm/316448502423?
https://www.amazon.com/Floor-Jack-Caster-Piece-Split-Washer/dp/B093RDX7W1?
Once they do that good luck fixing it.. replacement wheel IMO.

 

[Pablo]

My Hein-Warner Jack, owned for nearly 20 years. Never was a huge fan of the casters, because on the nut side of the unit (long bolts running through the body), the caster wouldn’t turn all the way.

But I’ve dealt with it for 20 years. Recently it got really bad. I think my wife clunked this one into another jack I have. That’s all I can guess. It’s the bearings, they’re screwed up.

View attachment 293705View attachment 293706

You can see the balls go 1.5-2 wide in the track and then jam. Can bend that upper cap and get them to stay in line, or what do I need to do in order to fix them?

I think the replacement casters are plastic, not metal. No thanks. Unfortunately I don’t recall which model this is to find parts. It’s a painted blue metal wheel.

Is this fixable? Bend it and spray some grease in there??

Likely there are similar models you can scavenge from, or shop steel casters. What size stem?

 

[Hirev]

You could bend that out heating it up with a acetylene torch. Otherwise I would just get a new aluminum floor jack with rapid pump they are so much better to use and move around than those old school jacks.

 

[Carmudgeon]

https://www.hcrcnow.com/shop/parts/hein-werner/categories/casters-floor-jack

Harbor Freight offers some replacement parts for their floor jacks. Might be a analog somewhere in their lineup.

Something like a caster should be relatively easy to find a replacement for.

 

[spasm3]

something like these?
https://www.ebay.com/itm/316448502423?
https://www.amazon.com/Floor-Jack-Caster-Piece-Split-Washer/dp/B093RDX7W1?
Once they do that good luck fixing it.. replacement wheel IMO.

Take that castor off and measure the wheel size and stem.

Several on flea bay like this.

https://www.ebay.com/itm/405405558660?_skw=hein+werner+jack+castor&itmmeta=01K1YDV32R5Q0838XVTM76DGJT&hash=item5e640de784:g:2ZIAAOSw03JnVKPz&itmprp=enc:AQAKAAAA0FkggFvd1GGDu0w3yXCmi1d/uie7SKoDDZG/OpeftrDSJZotp6sqmIeZsMjyZxmRYdJGCi/mTsk0hz+UjZQLISWGsRYF4yiXaC5yCr+Zkd96gPzD1Ts4JeLgnJ/odui35Iv+/SCcOZqvApR0w6oUHGhBk1+LTpmlluvmAUM13MPlj68ZqZCR3pWw1G7l0bh4pRgT3on+GzCNiWV5zftYMFzBhPkYhWQR8sQxt3uGF1GRV9R6DjkwnmYKVA4mIwkjhKlWMcyRXkq2RYSTwFf6g/w=|tkp:Bk9SR8Cx7M2PZg

https://www.ebay.com/itm/296743890263?_skw=hein+werner+jack+castor&itmmeta=01K1YDV32RCY0NZRGFWBP8DH8D&hash=item4517506d57:g:2BEAAOSwgnZnCHdd&itmprp=enc:AQAKAAAA0FkggFvd1GGDu0w3yXCmi1f7xtR0MXoD+Ya+qoDAG2qMre8Oi5a0ZThXK9uSFPsKBTMvkU28E0JzKH9Str74pv5ODnOJPkLJP0zrqK/9gdEfVCAWl+IbQ6NRep9/ChEOFuKgTAVkdx5ujSUT9gpV8PE04SjbVXNVnrKBXi23pS1dyXLf2r3CJDzjp9lEaHFtVpW8mGz0ZyZJGHUXe8AYOIoxuVxHMZ5tC8oa5S2HuJbcvtBvZ8ll95NkIjjjiT8UiBrxsdXmtL0jo6pVqqBAWck=|tkp:Bk9SR8Cx7M2PZg