filters for toyota

[mobilaltima]

will be doing an oil change on 4 vehicles all at one time, for my uncle. GMC acadia, will go with Mobil 1 5W30 and an AC/Delco PF 48. 2004 tundra, 260,000 miles, Pennzoil High Mileage 10w30. 2006 toyota highlander, 77,000 miles pennzoil 5W30, and a 2007 toyota camry, 60,000 miles, pennzoil 5W20. my question is, (trying to make it convenient for my uncle) are there any ACDelco, Motorcraft, or Mopar filters that will fit the toyotas? [censored] be buying all the oil at walmart, and he already mentioned he does not want to use fram or supertech. would just save him some time if he can use one of those OEM filters, instead of having to run to Napa, which is a good distance away.

 

[97prizm]

As far as the tacoma goes autopartswarehouse says that and ACDelco PF53 will fit your tacoma not sure about the sienna.-Malcolm

 

[chad8]

here is a sample below. the st3600 and various other 3600 # filters will fit too .look at the bottom any 3/4-16 2.734 diameter gasket will fit . there are many
the motor craft fl400 will fit but is not listed.
2007 TOYOTA CAMRY 2.4L L4 ELECTRIC/GAS : Engine : Oil Filter Wiki Price
PRONTO Part # PO4477 One of our most popular parts

$1.67
Add Part
MANN Part # ML1017



Add Part
DENSO Part # 1501001

Add Part
ACDELCO Part # PF1233

Part Image
$3.46
Add Part
BOSCH Part # 72167 manufacturers produce parts in multiple factories worldwide.]

$4.01


Part Image
$4.13
Add Part
MOTORCRAFT Part # FL836
$4.27
Add Part
AUTO EXTRA Part # 61857145

Add Part
FRAM Part # PH4386
$4.51
Add Part
WIX Part # 57145

Part Image
$4.73
Add Part
WIX Part # 51396
Part Image
$4.88
Add Part
FRAM Part # TG4386
Part Image
$6.56
Add Part
FRAM Part # XG4386
BOSCH Part # D3325
Add Part
BOSCH Part # 3325
Any filter with the below specs will fit...
Style: Spin-On Lube Filter
Service: Lube
Type: Full Flow
Media: Paper
Height: 4.828
Outer Diameter Top: 2.921
Outer Diameter Bottom: Closed
Thread Size: 3/4-16
By-Pass Valve Setting-PSI: 8-11
Anti-Drain Back Valve: Yes
Beta Ratio: 2/20=6/20
Burst Pressure-PSI: 275
Max Flow Rate: 7-9 GPM
Nominal Micron Rating: 21

Gasket Diameters
Number O.D. I.D. Thk.
Attached 2.734 2.430 0.226

 

[mobilaltima]

will the FL400 fit the tundra or the camry?

 

[chad8]

All of these are 4 cylinder applications . What motor is the tundra. The 4.0 takes an ac pf53

 

[mobilaltima]

the tundra is the 4.7. i think the PF53 fits the 4.0 and 4.7 if im not mistaken

 

[moto94536]

yes. 2011 toyota tacoma 4.0l use 90915-YZZD3.. You can buy it from ebay. 10 for $36. free shipping/no tax. great deal.