OK...the disclaimers first,
1. This test is not scientific. The additives were used as prescribed (correct dose)..science ends there.
2. This represents the worst case scenario. This is summer fuel from ElPaso TX...in -15F temps!!
3. I do not have gelling problems...at all. I did this for fun
4. I do not regularly use additives and don't think they are necessary..lots of experience too. I did this for fun
5. I did this for fun. I'm not trying to endorse anything or convert anyone's additive religions.
6. All additives were dosed at the ratio listed on the bottle. If there was a dosage change for below 0F..that's what was used.
7. The methyl alcohol used was dosed in at the same rate as the Howes...I had to pick something..so that's what I used.
Fuel was blended and left outside overnight. Lowest temp and temp at time of pictures was -15F.
OK...on with the pics.
1. This test is not scientific. The additives were used as prescribed (correct dose)..science ends there.
2. This represents the worst case scenario. This is summer fuel from ElPaso TX...in -15F temps!!
3. I do not have gelling problems...at all. I did this for fun
4. I do not regularly use additives and don't think they are necessary..lots of experience too. I did this for fun
5. I did this for fun. I'm not trying to endorse anything or convert anyone's additive religions.
6. All additives were dosed at the ratio listed on the bottle. If there was a dosage change for below 0F..that's what was used.
7. The methyl alcohol used was dosed in at the same rate as the Howes...I had to pick something..so that's what I used.
Fuel was blended and left outside overnight. Lowest temp and temp at time of pictures was -15F.
OK...on with the pics.
Last edited: