As I mentioned in another thread, I'd upload some pictures of my wife's Accord. I used Meg's wash and claybar, followed by a coat of Meg's cleaner wax. I followed it up with 2 coats of Collinite 476 paste with 4 coats overall on the hood. This is the first time I used Collinite products, but with the reviews I've read here, I decided to try it. I was impressed with it so far. A little difficult to remove, but not too bad. I did everything by hand (usually I use a polisher), but since this was the first time I went the safe route. I want longevity in the rain we get here. This car sits outside all the time, so better protection was the goal. Apparently, I put the coats on too thick so when I do my truck with it, I'll thin it down. Positive criticism is good with me!
And, for all the talk about mismatched bumpers on the other threads:
I had to detail the engine. This is, after all, BITOG.




And, for all the talk about mismatched bumpers on the other threads:

I had to detail the engine. This is, after all, BITOG.
