CV boot torn. Reboot? replace axle? What brand?
Need advice. 2016 Corolla LE CVT. Torn boot outer R cv axle. CV axle part number 4341002A03.
Parts.toyota.com says this part fits 2009-2019 with 1.8 engine with AT and a few with manual trans so maybe someone has experience on similar old Corollas. https://parts.toyota.com/p/Toyota_2016_Corolla-LE-AT/CV-Axle-Right--Front/73223852/4341002A03.html
Thought of rebooting but Toyota website advises not to reboot. Says," There are some Boot Kit with Diameter "b" is larger than Diameter "a" (See illustration...) For such Boot Kit, PNC 04438F, (BOOT KIT, FRONT DRIVE SHAFT, IN & OUTBOARD RH) is not established as a part for service.
Therefore, please order PNC43410 (SHAFT ASSY, FRONT DRIVE, RH) if you need to obtain an outboard side Boot. "
Anyone have success rebooting? If so, is there difficulty crimping boot clamps on a genuine Toyota boot because it is quite hard? There is a special Toyota crimp tool. https://www.ebay.com/sch/i.html?_fr...70.l1311&_nkw=toyota+boot+clamp+tool&_sacat=0
Or should I just buy an axle. Toyota from parts.toyota.com new list price is $547.38+ deposit $40, tax and shipping, about $650+. Lowest dealer price is $512 including tax, shipping, deposit. Any cheaper alternatives that last? Thanks
Need advice. 2016 Corolla LE CVT. Torn boot outer R cv axle. CV axle part number 4341002A03.
Parts.toyota.com says this part fits 2009-2019 with 1.8 engine with AT and a few with manual trans so maybe someone has experience on similar old Corollas. https://parts.toyota.com/p/Toyota_2016_Corolla-LE-AT/CV-Axle-Right--Front/73223852/4341002A03.html
Thought of rebooting but Toyota website advises not to reboot. Says," There are some Boot Kit with Diameter "b" is larger than Diameter "a" (See illustration...) For such Boot Kit, PNC 04438F, (BOOT KIT, FRONT DRIVE SHAFT, IN & OUTBOARD RH) is not established as a part for service.
Therefore, please order PNC43410 (SHAFT ASSY, FRONT DRIVE, RH) if you need to obtain an outboard side Boot. "
Anyone have success rebooting? If so, is there difficulty crimping boot clamps on a genuine Toyota boot because it is quite hard? There is a special Toyota crimp tool. https://www.ebay.com/sch/i.html?_fr...70.l1311&_nkw=toyota+boot+clamp+tool&_sacat=0
Or should I just buy an axle. Toyota from parts.toyota.com new list price is $547.38+ deposit $40, tax and shipping, about $650+. Lowest dealer price is $512 including tax, shipping, deposit. Any cheaper alternatives that last? Thanks