Changed the oil today, had 4 quarts of castol 5w30 and .5 of asoil 10w30. When I changed it what looked like water was coming out below the streem of oil. I was like oh crap. I felt the "water" and found it to be oil. I am wondering what would cause oil to run as thin as water? It also poured out of my filter. I checked my coolant and no loss. I am positive is wasnt water. I just find it odd that there would be 2 viscosities of oil. one thick and one thin as water. I am confused!!! Any Ideas? My gaskets were just replaced so i know there not leaking, and again It ran like water, but didn't look or feal like water.
I also Noticed when I ran the amsoil 10w30 my engine sounded worse than ever. The pistons were slapping and other things were knocking. I changed back to dino castrol after 24 hours. My engine was still knocking so I changed it again from 5w castrol to 10w castrol and its quieter now.
I also Noticed when I ran the amsoil 10w30 my engine sounded worse than ever. The pistons were slapping and other things were knocking. I changed back to dino castrol after 24 hours. My engine was still knocking so I changed it again from 5w castrol to 10w castrol and its quieter now.
