bypass and remote adapter

[rglr]

Is there such a thing as an adapter (mounted to the oil filter landing on the engine block) which is set up for a bypass and a remote full flow? Or do you have to do it with 2 adapters (a sandwich adapter for the bypass and a spin-on adapter for the FF)? I have been searching but unable to find one.

Thanks

 

[simple_gifts]

If you are relocating the FF and want a bypass, best to look @ Amsoil's products.

If you don't like their FF and bypass in one set up, you can always plumb up a FF remote and then tap into the oil pressure sender for your bypass feed.

HTH.

 

[Mike07]

You should look at the Top Dog V: http://paretopoint.com/item--TopDog-V--topdogv_s.html From Pareto Point. You can upgrade the Adapter with rare earth magnets with the Mag Dog:http://www.paretopoint.com/cat--MagDog--magdog.html
I have one on my 2007 Toyota Tacoma and it works good. It comes with an Amsoil EABP90 but you can upgrade it with a bigger filter like EABP100/110/120 if you have room. You can also upgrade the hoses with braided Fabric/or stainless steel because it comes with gates transmission lines with push on fittings. Other people on here are running the Top Dog V and it is cheaper than the Amsoil Kits. I hope this is what you were looking for.