I bet 0.095" string is the maximum recommended or even fittable into the head of that thing. Drag is the deal breaker with something like that. As for grass being hard on the string... it's not the grass but rather everything else that gets in the way while trimming. Surely to goodness we've been edging and doing lawn work long enough to know what is detrimental to our equipment.The 80V spins .095 and .105 string just fine but burns through the more expensive string just as fast
Why would lawn grass be hard on .080” string?
Stihl fs-91R or the next model up. I know a fww on here look down on Stihl but ive had great results with mine. Last weekend I finally needed a new bump head and nut. The Stihl associate found me an upgraded quick feed head. Now I'm mechanically inclined but have never used one. He took five minutes and grabbed a similar trimmer to what I have and showed me how to use it. Most places would've just said "read the manual ". Little things like this is why I'd buy another one tomorrow.I want to buy a new string trimmer and ultimately want some recommendations for what to get.
I am in the buy once / cry once crowd, so let's make this a good one. I want a major brand like Sthil, Echo, Red Max, Husqvarna etc.
In short, I am just a homeowner, but I want to buy a very high quality machine that if I were to use it daily for a commercial landscaping company that it would just keep going trouble-free.
I want features but no silly Internet connectivity garbage. I also want simplicity. As for size, I want something middle of the road in CCs, so not a 21 CC... not a 30 CC. I want something that I can put attachments on it to trim hedges and bushes etc.
I also want super reliable easy to start. All in the budget is around $800, but it needs to string trim AND have at least one other attachment.
What do I buy?
It fits. I’m hard on mine - 3 heads in 5 years.I bet 0.095" string is the maximum recommended or even fittable into the head of that thing. Drag is the deal breaker with something like that. As for grass being hard on the string... it's not the grass but rather everything else that gets in the way while trimming. Surely to goodness we've been edging and doing lawn work long enough to know what is detrimental to our equipment.
I can adjust the carburetor on my Echo. I just remove the cover plugs from over the adjustment screws.Adjustable carburetor is a must for me. Chose a Stihl over Echo in 2010 for that reason. No regrets.
Not sure. I purchased it at Costco about two years ago for around $200. It’s not a bad unit just an awkward and bulky head that is slow to accelerate. Also to get it to feed line, you have to bash it crazy hard against the ground. It’s basically a very, very bad clone of the Echo Speed Feed 400 only thicker and does not really work.What model Greenworks? This surprises me. I can get the heavy part with the largest battery but not so bad with a standard battery. But ours is quite powerful. Can’t use it near woven wire fences as it will maul the fence and rips right through saplings.
Honda HHT35, HHT25, or the Makita MM4 25cc trimmer. All four-stroke -- I believe the Makita runs a robin engine.I want to buy a new string trimmer and ultimately want some recommendations for what to get.
I am in the buy once / cry once crowd, so let's make this a good one. I want a major brand like Sthil, Echo, Red Max, Husqvarna etc.
In short, I am just a homeowner, but I want to buy a very high quality machine that if I were to use it daily for a commercial landscaping company that it would just keep going trouble-free.
I want features but no silly Internet connectivity garbage. I also want simplicity. As for size, I want something middle of the road in CCs, so not a 21 CC... not a 30 CC. I want something that I can put attachments on it to trim hedges and bushes etc.
I also want super reliable easy to start. All in the budget is around $800, but it needs to string trim AND have at least one other attachment.
What do I buy?
Honda HHT35, HHT25, or the Makita MM4 25cc trimmer. All four-stroke -- I believe the Makita runs a robin engine.
Might be a bit hard to find, but they run exceptionally well, and they last forever. SO easy to start. Also seem to never have issues.
I run a HHT35, and it's over a decade old -- probably closer to 15 years old; Never given me any trouble. While there are some 2-stroke units nowadays that have a little more power than mine, it has plenty of power for everything I've thrown at it. I recently switched over to rotary scissors on this unit and it's a perfect combo.
Honda HHT35, HHT25, or the Makita MM4 25cc trimmer. All four-stroke -- I believe the Makita runs a robin engine.
Might be a bit hard to find, but they run exceptionally well, and they last forever. SO easy to start. Also seem to never have issues.
I run a HHT35, and it's over a decade old -- probably closer to 15 years old; Never given me any trouble. While there are some 2-stroke units nowadays that have a little more power than mine, it has plenty of power for everything I've thrown at it. I recently switched over to rotary scissors on this unit and it's a perfect combo.
It doesn't just screw on? String heads are pretty universal, there are a few different thread sizes and left-hand vs. right hand rotation.that the head cannot be changed. I was just going to swap,it wirh an Echo Speed Feed
Great leaf blower, I have the Dolmar version of it and due to my ridiculous OCD it gets abused almost daily!I have a Makita 4 cycle leaf blower that I absolutely love. It starts so easy, and runs great.
Paid a fair bit of money for a Dewalt electric weed whacker, and the speed controller died under warranty. Got it fixed, only to have it die after a few more years. It seemed that every time I needed it, the battery was low, also. My bad. But I don't want batteries on the charger in the garage overnight. A guy on a different forum burned down his garage that way.
About a year ago, I couldn't find a Makita 4 cycle weed whacker, so I bought a Honda UMC425LAAT VersaAttach power head. Bought the string trimmer and edger attachments to go with it. Believe it or not, but the Honda doesn't start as easily as the Makita, but it's not too bad. With the string trimmer head, the Honda is heavy and cumbersome. The Echo 2620T is much lighter and easy to use in comparison, so the Honda is demoted to edging use only at this point.
I am pretty sure the Costco units are made specifically for a price point. I have read this, at least. Different models maybe explains why I am pleased with mine. Wife bought the 80V stick blower at Costco and I notice the online units are different, and of course this model is weak compared to the 80V Greenworks Backpack blower which is a monster with the 5Ah battery on my back. Really blows!!Not sure. I purchased it at Costco about two years ago for around $200. It’s not a bad unit just an awkward and bulky head that is slow to accelerate. Also to get it to feed line, you have to bash it crazy hard against the ground. It’s basically a very, very bad clone of the Echo Speed Feed 400 only thicker and does not really work.
When you bash it into the ground hard enough to feed line, it stays depressed and to get it to pop out you need to stop and yank on it or pry it wirh a flat blade screw driver. Adding line you basically need to step on it applying maybe 120+ lbs of force to depress it, then turn it until the marks align. At that point eventually wirhin a half dozen tries the line goes around and through and can be wound up.
Other than that it just weighs probably what a 30 CC gas unit does wirh the power of 75% that if a 20 CC unit. In short it works, but I would not buy it again.
I called the company and they told me everything I am saying is normal but that the head cannot be changed. I was just going to swap,it wirh an Echo Speed Feed
Great questions. Seems as if I find a brand I like, then it changes next buy.Thread drift alert....
What's everyone's favorite string? I've been loving my new Echo 2620T, which comes with .095 Black Diamond string, and it seems to be pretty durable. On the Echo website they state that their Cross Fire string is the most popular. I suspect it doesn't matter a whole lot, but feel free to share your opinion...