N nascarnation Joined Apr 30, 2004 Messages 2,328 Location Indiana Apr 15, 2025 #1 Appreciate any suggestions, thanks
Sayjac Joined Oct 13, 2008 Messages 17,588 Location SENC Apr 15, 2025 #2 If you have room for a bit of extra length, any automotive 3614 or equivalent application filter will fit the bill.
If you have room for a bit of extra length, any automotive 3614 or equivalent application filter will fit the bill.
JavierH19 Joined Feb 25, 2019 Messages 7,437 Location Texas Apr 15, 2025 #3 How much clearance in legth do you have.
T thastinger Joined Oct 23, 2017 Messages 3,288 Location VA Apr 15, 2025 #4 My 810cc B&S commercial turf engine takes an FL400 or WIX 1516
R redhat Joined Dec 7, 2012 Messages 4,152 Apr 15, 2025 #5 I’ve been buying these for my Vanguards. They’re nicely made. $10. Briggs 842921 https://a.co/d/eW2zR8Y
I’ve been buying these for my Vanguards. They’re nicely made. $10. Briggs 842921 https://a.co/d/eW2zR8Y
MurkyAsparagus Joined Dec 20, 2022 Messages 630 Apr 15, 2025 #6 I’ve used WIX 51056, WIX 51348, NAPA Proformer 21348, and now CarQuest 85516. Sizing goes 51056 < 51348 = 21348 < 85516 They cross over to a couples cars on RA for cataloging. 2006 Mazda Miata, 2009 Mazda CX9 for the 51348 and 85516, respectively.
I’ve used WIX 51056, WIX 51348, NAPA Proformer 21348, and now CarQuest 85516. Sizing goes 51056 < 51348 = 21348 < 85516 They cross over to a couples cars on RA for cataloging. 2006 Mazda Miata, 2009 Mazda CX9 for the 51348 and 85516, respectively.
T Tdbo Joined Aug 18, 2009 Messages 5,323 Location Ohio Apr 15, 2025 #7 https://www.oilfilter-crossreference.com/convert/BRIGGS-STRATTON/696854
JTK $100 Site Donor 2025 Joined Aug 14, 2003 Messages 17,059 Location Buffalo, NY Apr 15, 2025 #8 I've been running Champ PH2835, Fram PH3614 equivalents on the Briggs 18hp single on my Craftsman rider for years.
I've been running Champ PH2835, Fram PH3614 equivalents on the Briggs 18hp single on my Craftsman rider for years.
N nascarnation Thread starter Joined Apr 30, 2004 Messages 2,328 Location Indiana Apr 15, 2025 #9 Thanks folks. That coat of yellow paint on the filter makes it quite pricey.
Hootbro Joined Aug 25, 2003 Messages 4,409 Location DELAWARE Apr 15, 2025 #10 I have been using a Lube Finer PH3656 shorty for my Cub Cadet. https://www.amazon.com/dp/B0049LUSE4
JTK $100 Site Donor 2025 Joined Aug 14, 2003 Messages 17,059 Location Buffalo, NY Apr 17, 2025 #11 Hootbro said: I have been using a Lube Finer PH3656 shorty for my Cub Cadet. https://www.amazon.com/dp/B0049LUSE4 Click to expand... When I owned each of my Cubs, one with a Kohler Command 20hp V-twin, the other with a Courage V-twin, I ran FL400 or equivs on those. Tons of room to.
Hootbro said: I have been using a Lube Finer PH3656 shorty for my Cub Cadet. https://www.amazon.com/dp/B0049LUSE4 Click to expand... When I owned each of my Cubs, one with a Kohler Command 20hp V-twin, the other with a Courage V-twin, I ran FL400 or equivs on those. Tons of room to.
Hootbro Joined Aug 25, 2003 Messages 4,409 Location DELAWARE Apr 17, 2025 #12 JTK said: When I owned each of my Cubs, one with a Kohler Command 20hp V-twin, the other with a Courage V-twin, I ran FL400 or equivs on those. Tons of room to. Click to expand... I wish I had the room on mine. I have to run a short one or the steering rod will hit with anything bigger
JTK said: When I owned each of my Cubs, one with a Kohler Command 20hp V-twin, the other with a Courage V-twin, I ran FL400 or equivs on those. Tons of room to. Click to expand... I wish I had the room on mine. I have to run a short one or the steering rod will hit with anything bigger
K kimmillard1 Joined Jan 23, 2025 Messages 65 Apr 27, 2025 #13 redhat said: I’ve been buying these for my Vanguards. They’re nicely made. $10. Briggs 842921 https://a.co/d/eW2zR8Y Click to expand... They average about 9 bucks on Amazon.
redhat said: I’ve been buying these for my Vanguards. They’re nicely made. $10. Briggs 842921 https://a.co/d/eW2zR8Y Click to expand... They average about 9 bucks on Amazon.