Hi,
Imagine 2 new 12V batteries:
a) 80 Ah Cold cranking 800A
b) 60 Ah Cold cranking 600A
The car of interest is rated to use the 80 Ah battery and starts the car perfectly. During start, the voltage drops from 12,6V to 10V and raises normally again to the alternator voltage of 14,5 V.
Question:
What would happen if I install a 60Ah instead (without having the option to make any measurements)?
a) Due to the lower cold cranking, the car will struggle more to deliver sufficient amperage to turn over the engine but the voltage still only drops to 10V before it raises again (like the bigger battery).
b) Due to the lower cold cranking, the car will struggle more to deliver sufficient amperage to turn over the engine, but now the voltage drops to lower value than 10V because it struggles even more to deliver the amperage.
What will happen?
Lucas
Imagine 2 new 12V batteries:
a) 80 Ah Cold cranking 800A
b) 60 Ah Cold cranking 600A
The car of interest is rated to use the 80 Ah battery and starts the car perfectly. During start, the voltage drops from 12,6V to 10V and raises normally again to the alternator voltage of 14,5 V.
Question:
What would happen if I install a 60Ah instead (without having the option to make any measurements)?
a) Due to the lower cold cranking, the car will struggle more to deliver sufficient amperage to turn over the engine but the voltage still only drops to 10V before it raises again (like the bigger battery).
b) Due to the lower cold cranking, the car will struggle more to deliver sufficient amperage to turn over the engine, but now the voltage drops to lower value than 10V because it struggles even more to deliver the amperage.
What will happen?
Lucas