- Joined
- Oct 4, 2023
- Messages
- 23
For this price I will buy it for chainsaw bar oil......
Thanks for the share OP!
Thanks for the share OP!
If you familiarize yourself yourself with the chemistry make up of this oil, you probably wouldn’t want to run more than 1 quart of it at a time - per crankcase fill.Gonna run it in my Odyssey
For this price I will buy it for chainsaw bar oil......
Thanks for the share OP!
I don't think it'll matterIf you familiarize yourself yourself with the chemistry make up of this oil, you probably wouldn’t want to run more than 1 quart of it at a time - per crankcase fill.
People need to think of it as a “high zinc oil additive” - not as “engine oil”.
I just came back from a 1.5 hr drive after topping off 1 qt of this in my 4 qt sump, the engine got a lot smoother.If you familiarize yourself yourself with the chemistry make up of this oil, you probably wouldn’t want to run more than 1 quart of it at a time - per crankcase fill.
People need to think of it as a “high zinc oil additive” - not as “engine oil”.
The ones I ordered all arrived just fine.Mine never came
Same.….. the little white thin ceiling foam in the cap was mis-shapen and folded slightly. Thats how some got out. There is no foil sealing the tops, just that white foam thing
How much did you add?The ones I ordered all arrived just fine.
I’m using it as an oil additive in my 6.0 Powerstroke with “high-pressure-oil” HEUI injectors. It has made a significant (noticeable) difference.
This engine holds 4 gallons of oil (16 quarts)
Just 2 quarts for now - enough to bring it up to “full” on the dipstickHow much did you add?