Multiple DTCs on Camaro v6 2011; need help please

[GMBoy]

Those are NOT codes. That screen in an autel is simply showing the STATUS of each test as if it has run yet or passed etc. It shows every test/code available - pass/fail/not tested yet.

You need to simply select current codes and you will ONLY get the present set codes. Do that and report back.

 

[Passport1]

Clear the codes and check the idle adjustment screw. Got internet hint from Marty McFly.

 

[D60]

Clear the codes and check the idle adjustment screw. Got internet hint from Marty McFly.

And the throttle cable!!

 

[Rand]

Those are NOT codes. That screen in an autel is simply showing the STATUS of each test as if it has run yet or passed etc. It shows every test/code available - pass/fail/not tested yet.

You need to simply select current codes and you will ONLY get the present set codes. Do that and report back.

I didnt even look that hard at it. for all the effort of posting all that.... posting them sideways sorta killed it.

 

[iCurious]

Sweet baby jesus the line of sideways screenshots.

My necks hurts so I gave up.

 

[Hall]

Fixing one code may fix others.

Yeap, I've watched enough South Main Auto to have learned this. You have to think about these systems before going down the wrong path entirely and like many have said, step # 1 is check the battery connections.

 

[Rand]

As others have said, clear the codes and see what comes back. Then attack the code that seems to point to the main problem first and then go from there. Fixing one code may fix others. Some of those codes could be from a low battery or unhooking sensors and components with the key on.

Yeap, I've watched enough South Main Auto to have learned this. You have to think about these systems before going down the wrong path entirely and like many have said, step # 1 is check the battery connections.

not even codes its @GON fail . he posted the test status(es) not codes.... SIDEWAYS.
as @GMBoy pointed out earlier.. but I didn't even look at the sideways pictures long enough to figure that out.

 

[97prizm]

The first code is an immobilizer code, then a ECU code, then a TCU code, then a bunch of system codes, sensor codes and misfire. I am surprised it runs.

A single sensor or whatever does not throw this many codes. I also suspect wiring / ground / low battery / ECU.

Can you at least edit the pictures and rotate them so there readable.

Low battery or one with a bad cell will definitely cause this. Had a ford C-max when I worked for a dealership that the customer brought back twice with the dash lit up. Finally put a new battery in it and all the problems went away.

 

[Hall]

he posted the test status(es) not codes.... SIDEWAYS.
as @GMBoy pointed out earlier.. but I didn't even look at the sideways pictures long enough to figure that out.

I mean, there could be a code or two in there but I think ALL OF US gave up trying to read sideways.