A slightly higher syn blend...

Status
Not open for further replies.
Interesting.

Although the MSDS did not specify Conventional vs Syn % in the Blend oil it did show us this:

Kendall GT-1 Syn Blend (All Grades)
Lubricant Base Oil (Petroleum) VARIOUS >80
Additives PROPRIETARY

Kendall GT-1 Full Synthetic (All Grades)
Synthetic Lubricant Base Oil PROPRIETARY >75
Additives PROPRIETARY <25
 
Dave your right. It was right under my nose and I missed the link. Oh well....age is catching up with me.

Anyway....comparing the Motorcraft site for the PDS, which is very limited, and the Kendall site for 5w30 PDS. Both oils look very similar in information. The MC site does not give the VI which is important.

Based on the limited information from MC on the 5w30 Synthetic Blend and comparing that data to the Kendall PDS it appears both oils are similar. The add packs may be different since Kendall has the Titanium and MC does not.

IMO.....I doubt that Conocophillips would use completely different base oils for similar products like Kendall and Motorcraft since they are both within the same price range.
 
Originally Posted By: mongo161
Dave your right. It was right under my nose and I missed the link. Oh well....age is catching up with me.

Anyway....comparing the Motorcraft site for the PDS, which is very limited, and the Kendall site for 5w30 PDS. Both oils look very similar in information. The MC site does not give the VI which is important.

Based on the limited information from MC on the 5w30 Synthetic Blend and comparing that data to the Kendall PDS it appears both oils are similar. The add packs may be different since Kendall has the Titanium and MC does not.

IMO.....I doubt that Conocophillips would use completely different base oils for similar products like Kendall and Motorcraft since they are both within the same price range.


I'm the one that posted the link but my names not dave. lol
 
Last edited:
Originally Posted By: mongo161
Sorry about that Volk06....age is really doing a number on me today. I should have stayed in bed....lol.


You can with today's technology!
lol.gif
 
Originally Posted By: mongo161
Sorry about that Volk06....age is really doing a number on me today. I should have stayed in bed....lol.


Lol, its friday after all! I hate when I have one of those "should have never gotten out of bed" days.
cheers3.gif
 
What a coincidence! Today, compliments of Tom from NJ, there is a new listing of oils that have been tested.

Motorcraft Synthetic Blend 5w30, SM, GF-4 is on the list......
as of January 20, 2012

http://www.pqiamerica.com/January2012A/January2012R2/motorcraft.htm

Kendall Synthetic Blend, 5w30, SN, GF-5 was tested earlier last September by the institute and the results are here.....

http://www.pqiamerica.com/Kendall.htm

Now we still don't have any hard data to compare both of the Conocophillips quality oils.
 
Last edited:
Your right....I had better call it quits for tonight and get to bed...I might be coming down with something.

Thanks for the correction Jim.

Post has been corrected.....
 
Last edited:
Originally Posted By: mongo161
Your right....I had better call it quits for tonight and get to bed...I might be coming down with something.

Thanks for the correction Jim.


^Take care, I just got over a cold that felt like flu/hay fever wrapped into one. No stomach virus though, thankfully.
 
Originally Posted By: volk06
It was sm motorcraft that was tested, too bad it wasn't sn



Agreed...more on this story.....
 
Well, Dave what is the more on this story? Do you have some info that can help us out?


Originally Posted By: daves87rs
Originally Posted By: volk06
It was sm motorcraft that was tested, too bad it wasn't sn



Agreed...more on this story.....
 
At the moment-no.

I'm in talks with a few folks from Dearborn (Ford) to give me a heads up on the motorcraft oil changes....the little I can give you is yes-they did up the syn so that their smaller DI engines could be more protected....


Also found it cool that they use Kendall on site as well! (SSHHH!)
 
I've been saying C.P. semi-syns are 50% or > for a while now . Was told this by a tech at C.P. over a few years ago . The new Pennzoil semi-syn Gold is 50% . Informed by a tech at S.O.P.U.S. about a year ago . The S.U.V. hovered around 40% .
 
Last edited:
Originally Posted By: odie
I've been saying C.P. semi-syns are 50% or > for a while now . Was told this by a tech at C.P. over a few years ago . The new Pennzoil semi-syn Gold is 50% . Informed by a tech at S.O.P.U.S. about a year ago . The S.U.V. hovered around 40% .


It would make sense....
 
Status
Not open for further replies.
Back
Top Bottom