98 buick lesabre,how many subframe bushings does it have?

[The_Eric]

When you ask for rear subframe bushings - do you mean the rear portion of the front subframe?

Should all be the same part number - 924-043

 

[ziggy]

When you ask for rear subframe bushings - do you mean the rear portion of the front subframe?

Should all be the same part number - 924-043

Eric no rear as in far back bumper area of the car.as in where ide put gas in the tank and muffler is.rear.
Is Thier a different part number for those 2 bushings?

 

[Ihatetochangeoil]

Thanks! The eBay website,has a part fit checker.shows it will not fit a 98 lesabre.nor the 98 leaves is listed.sure part 924-044 will fit?
I do know, 924-043 will.

C'mon man, this isn't hard. Buy ONE and see if it fits. While you're UNDER the car putting ONE on, look around and see what's there.

 

[ziggy]

C'mon man, this isn't hard. Buy ONE and see if it fits. While you're UNDER the car putting ONE on, look around and see what's there.

I cant. Because landlord didn't give me permission.last address did. Si,trying to get everything together before friend mechanic gas it in the air.
Is their a rear part number for subframe bushings? 924-043 are front.back ones?

 

[Ihatetochangeoil]

I cant. Because landlord didn't give me permission.last address did. Si,trying to get everything together before friend mechanic gas it in the air.
Is their a rear part number for subframe bushings? 924-043 are front.back ones?

Ziggy, this is soo easy. You haven't previously stated (that I know of) that you're restricted on WHERE you can work on your car...I've changed oil before in an outside corner of a Walmart parking lot or a parts store parking lot (while I'm working out of town) or even a rest stop on a highway.
Of course I had all tools necessary and left NO mess behind. And I was done in an hour or so. The "worst" thing that's happened to me is I've had well meaning strangers ask me if I needed help.
The Real question I have for you is How determined are you? Where CAN you do this close to home?

 

[ziggy]

Ziggy, this is soo easy. You haven't previously stated (that I know of) that you're restricted on WHERE you can work on your car...I've changed oil before in an outside corner of a Walmart parking lot or a parts store parking lot (while I'm working out of town) or even a rest stop on a highway.
Of course I had all tools necessary and left NO mess behind. And I was done in an hour or so. The "worst" thing that's happened to me is I've had well meaning strangers ask me if I needed help.
The Real question I have for you is How determined are you? Where CAN you do this close to home?

I risk getting a citation. Not supposed to be doing that thier,cop pulls up,citation time.don't wanna risk that.
I'm simply asking,in post, what the rear part numbers would he.its not 924-043.

 

[Ihatetochangeoil]

I risk getting a citation. Not supposed to be doing that thier,cop pulls up,citation time.don't wanna risk that.
I'm simply asking,in post, what the rear part numbers would he.its not 924-043.

Ziggy, I don't know the answer to your question. Everything Buick I own is 2000-2005. It's your car, I don't understand why YOU simply don't go look. And I cannot fathom anyone getting a "citation" for doing minor repair/maintenance to a car in a parts store PARKING LOT??? Do tell friend, what would the "citation" be for? We must be from different worlds. I have Auto Zone, O'Reilly, Napa and Advance auto parts stores within 5 miles of where I live and I see this stuff all the time. Parts stores call these people customers. I have also personally pulled into a highway rest stop on an interstate highway to "swap" into my snow tires which I had in the trunk of my car at the time. And yes, it was snowing. Would an "officer" in your world have cited me for this?

 

[ziggy]

Well,went too local Buick dealer. Subframe bushings were discontinued. I do need rear sway bar bushings though too. Those,GM ..$1.60 each. So ordered 4. And a gm brand new fuel injector o rings. 148,700 miles,they were never done I think.
So...mechanic Gunna try n see about the 2 rear subframe bushings. The mechanic told me,it's his opinion,Thier bigger than the front ones. Front ones,I can get almost anywhere.