Originally Posted By: SteveSRT8
Originally Posted By: JOD
Originally Posted By: SteveSRT8
Originally Posted By: JOD
I'm not sure why folks have the assumption that CVT's won't last. There are fewer moving parts than an AT and no friction materials to wear out. I think that mostly it's just fear of the unknown...
While I would agree the vast majority of these units are performing well for most owners I would disagree there are no friction materials to wear out!
Ever see how these typically work?
Well, I'm most familiar with the one in my own car (ZF CFT-30), and there are no friction materials to wear out on this transmission (unless you consider the chain or drive pulleys to be "friction materials"). The friction is provided by the fluid under compression. There are are no sacrificial clutches etc, and there is literally nothing to "wear out" except the fluid.
Keep in mind, I'm not saying that the Ford (or any) CVT is perfect. There have been a fair number of input shaft failures (most related to an O-ring), but on the transmission itself there are really no wear points like there are with a conventional automatic.
There IS a conventional torque converter, which does contain a typically clutch--so yeah, that potentially will wear out, but 1) it locks down WAY less than the torque converter in a conventional AT and 2) it's no different than the torque converter in a regular AT.
Back to the subject at hand though, I don't see a reason to avoid Subaru's CVT because Nissan had trouble with their transmission... While there may be some bad examples of CVT's out there, the Subie transmission seems pretty reliable so ar.
Your post mentioned Fords. Another quoted poster mentioned two other brands and Subaru. There was nothing to indicate you wished to confine the discussion to Subaru only.
But again I ask, have you actually seen how they work? The pulleys or sheaves slide the belt or chain up and down themselves. This is indeed a severe wear point and is the primary reason that these are NEVER spec'd for any high torque applications. They simply cannot do it. And please note that a TC is not simply on or off anymore, many apps vary the lock up and some even 'stutter' the lock to inhibit the driveline vibe some cars have.
As I stated earlier the average small car buyer is getting good service from a CVT, but they can and will wear out eventually, just like anything else...
New Pathfinder has 5,000lbs towing rating, i would consider it to pretty impressive
Originally Posted By: JOD
Originally Posted By: SteveSRT8
Originally Posted By: JOD
I'm not sure why folks have the assumption that CVT's won't last. There are fewer moving parts than an AT and no friction materials to wear out. I think that mostly it's just fear of the unknown...
While I would agree the vast majority of these units are performing well for most owners I would disagree there are no friction materials to wear out!
Ever see how these typically work?
Well, I'm most familiar with the one in my own car (ZF CFT-30), and there are no friction materials to wear out on this transmission (unless you consider the chain or drive pulleys to be "friction materials"). The friction is provided by the fluid under compression. There are are no sacrificial clutches etc, and there is literally nothing to "wear out" except the fluid.
Keep in mind, I'm not saying that the Ford (or any) CVT is perfect. There have been a fair number of input shaft failures (most related to an O-ring), but on the transmission itself there are really no wear points like there are with a conventional automatic.
There IS a conventional torque converter, which does contain a typically clutch--so yeah, that potentially will wear out, but 1) it locks down WAY less than the torque converter in a conventional AT and 2) it's no different than the torque converter in a regular AT.
Back to the subject at hand though, I don't see a reason to avoid Subaru's CVT because Nissan had trouble with their transmission... While there may be some bad examples of CVT's out there, the Subie transmission seems pretty reliable so ar.
Your post mentioned Fords. Another quoted poster mentioned two other brands and Subaru. There was nothing to indicate you wished to confine the discussion to Subaru only.
But again I ask, have you actually seen how they work? The pulleys or sheaves slide the belt or chain up and down themselves. This is indeed a severe wear point and is the primary reason that these are NEVER spec'd for any high torque applications. They simply cannot do it. And please note that a TC is not simply on or off anymore, many apps vary the lock up and some even 'stutter' the lock to inhibit the driveline vibe some cars have.
As I stated earlier the average small car buyer is getting good service from a CVT, but they can and will wear out eventually, just like anything else...
New Pathfinder has 5,000lbs towing rating, i would consider it to pretty impressive