Search results

The best way to get an answer would be to check out Franks site web page. Or you could give Frank a call. He's been helpful every time I've called.

I bought some PS fluid at Walmart labeled "For Honda vehicle" and would like to know if anyone's used it.

Taken from this thread web page was going through the valvoline msds list the other day, and i noticed that the "synpower" treatments is pretty much kerosene. (complete fuel system cleaner) Ingredient(s) CAS Number % (by weight) KEROSENE 8008-20-6 52.0- 62.0 LT HYDROTREATED PETROLEUM...

I've recently started using the ST3593A filters after reading the comments on the board. Yesterday, I was going to just replace the filter because I am going to run Auto-Rx. However, when I went to remove the filter, I couldn't get it off. I'm sure that I oiled the filter and that I didn't...

Thanks for the recommendations. However, in trying to take off the filter I used: 1) Cap wrench and a ratchet 2) Strap wrench 3) Channel locks, but all were unsuccesful. Even the mechanic said, that this was the hardest filter that he ever had to take off. I'm going to take a look at other...

I know a lot of people have had problems with glare and windshiled chatter from using Rain-X and I had similar problems. However, I started using Aquapel and haven't had any problems at all.

I've used a CWB for a year now and am satisfied with the results. To ensure that I'm not dragging any particles, I wipe down the blade with a clean down between each pass. I also alternate the side I use after each pass. After I'm done with the CWB, I dry the car off with a waffle weave MF...

I've been using Mother's 1-2-3 system for a couple of years and think its a good product for novice detailers. However, as I became more into detailing, I found products that provided better protection and longer lasting results.

Wow, that's a lot to pay for shipping. I was going to puchase some products from Odis, but that shipping is outrageous. Maybe there's a distributor closer to us Californians.

I second the suggestion for using 303 for your interior. If you want the matte look, be sure to buff out the 303. Only drawback of 303 is the cost, but its not too bad if bought by the gallon.

I only needed 4 bottles too, but it was cheaper just to buy 6 bottles at the special price. I might just use the extra bottles on my dads car or just use them for the maintenance dosages. Good thing I bought them before the price increase.

Sounds good. I've been using only Honda ATF since I bought the car and change it every 15K miles. I can get the fluid for about $3/qt so I don't mind chaging it often. If I bring my own fluids, should I bring 7 qts or do I need to bring more?

Exactly, there is no replaceable transmission filter on Acura trannies. Also, I just want to know if anyone with a honda/acura has done the T-tech flush and whether or not they had any problems.

According to the service rep, a "triple flush" consists of using 12 qts of ATF and changing the fluid 3 times. I was told by the same rep that because of the design of honda/acura transmissions, that this method was the safest way. He was saying that flushing the system might cause clogging.

After reading all the good things about Auto-Rx, I ordered some for my oil and my auto tranny on my 94 Integra. I understand the process for the oil change, but am a little confused about the flushing part for transmissions. On the Auto-Rx site, they recommend using a T-tech flushing system to...

I've been to 5 Walmarts in the Northern California area and none of them have the ST 3593A filter in stock. At the Walmart I shop at its about 10% ST and 90% Fram.

This is my first post and I am fairly new to the forum, but I've been reading some old threads about filters. Basically, I an deciding whether to get a Uni Foam or K&N Filter for the Comptech Icebox. I can get both for around the same price (~$65)and am not sure which to get. I used think...