Search results

i had the fuel regulator replaced about 3 weeks ago, but haven't let it sit for more than 12 hours yet.So far so good

It will be a couple of days before it sits a while

Car is a 2003 with the v6.If car sits four 2 or more days it will not start until you have to crank engine over for at least for or five times.Was wondering if any one would know what would cause this.

I know drilling a hole in plexglass will stop the crack from spreading.Did this in a boat 15 years ago hasn't gotton any larger.

https://www.amsoil.com/storefront/asl.aspx

I have a 99 explorer with the 4.0 use pure 1 oil filter and never had any knock.

I purchased one for a saturn vue with the 3.5 Honda motor it was rated at 99%at 40 microns I emailed purolater this is their responce" Thank you for your interest in our Purolator filtration products. We have researched your concern promptly and apologize for any confusion the website may have...

It has done it in overdrive a couple of weeks ago.Just got back from garage he felt the clutch slip i guess he will change it later this week i just have to get the parts.I will change flywheel and slave cylinder at same time

Yes i am the original owner. A couple of years ago tried to pull heavy boat out of water and i really smoked the clutch left a huge blue cloud and smelled for days.Asked one of the techs at the local ford dealer about getting a new one but he said that the original were weak and the aftermarket...

I have a 2003 ford f150 with the 4.2 liter 6 5 speed manuel transmission.The last couple of weeks the clutch is beginning to slip in fourth gear going up hills.Truck has 82000 miles on it.Sometimes used to towing 2500 pound trailer.Was wondering what would be the best brand of clutch would be...

It only makes noise when brake is applied

I have a 2000 jimmy that brakes real hard.You have to push on the brake pedal real hard to get brakes to work.I had the hood up yesterday and had someone push the pedal when they pushed it there was a hissing noise comming from around master cylinder.Now when pushing brake pedal you have to put...

I have dropped off many gallons of used oil over the years no one has ever asked for any informationat any time.

Truck has 64000 miles on it needs left gasket replaced for second time.It is leaking oil externally which is the way it was last time same spot.Dealer fixed under warranty last time at 34000miles.Was wondering if anyone knew how difficult this job was any what brand of gasket would be the best...

just purchased the one at napa did one wheel bearing worked well but did use alot of grease.found it a lot easier than doing by hand always had trouble getting grease going through rollers thanks for your replys

Just

yes like that one saw one like it at napa just want to know if it works the

Does anyone know if those bearing packing tools the two inverted cones work? Package claims that it pushes out the old grease and replaces it with new.Thanks for any information

believe it or not West Marine sells delvac 15-40 in quarts or 4qts containers for about the same price as walmart

it was on the car about 4 months