Wow! The smell of LC >>>>

[Terry]

jbas, you laugh but there are retards out there that would read these comments and try it. I fear a kid attempting to huff the stuff and his bereaved parents shutting Odis down.

TD

 

[satterfi]

I hope LC doesn't have vinyl chloride in it.

Has anyone seen an MSDS?

 

[Pablo]

Good question. Where is the MSDS on FP and LC?

 

[Terry]

You need to address Odis on the MSDS. I have a copy of a MSDS from our testing but am not at liberty to share it.

NO Vinyl Chloride.

Because the flash point of the products are well above 313F there is no special requirements for shipping etc.

972 221 1343 for Odis, who I think is fishing in East Texas somewhere !

TD

 

[MolaKule]

The Flash Point is around 535 F.

No MEK's, no acetones either!

4 down, 600 compounds to go!

Ok, can't hold back. It's the Gummy Bear's Cousins.

[ July 23, 2004, 04:41 PM: Message edited by: MolaKule ]

 

[Pablo]

Can you confirm the presence of long chain alcohols and amines?

 

[MolaKule]

Just joking around in previous post(s)!


We cannot confirm nor deny ANY component due to N-D agreements.

 

[jbas]

quote:

---

jbas, you laugh but there are retards out there that would read these comments and try it. I fear a kid attempting to huff the stuff and his bereaved parents shutting Odis down.

---

We understand your's and MolaKule's careful discussion of this topic. The greater danger is the "retards'" attorneys, who (want to) believe that every accidental thing was purposed.

Still, Fuel Power has a great "bubble-gum" color to it, and it does make my kids' mouths water... Oh, relax, just kidding...

 

[VaderSS]

Just for all the Darwin Award wannabees... I have not nor will I ever actually sniff these products, but you can certainly smell it when you are carefully, and in a well ventilated area, pouring the product from one large container to a small container. As for not getting it on my hands, I had never really worried about it, and must say that it is almost impossible to not get it on your hands, using the bottles sold with LC/FP, unless you are using gloves. I'll be using them in the future...

 

[USAFREOD]

Methyl Ethyl Ketone (MEK)???

 

[jbas]

Yet two more reasons - re-stated here - to buy LC or FP. The plastic gallon container FP comes in is excellent for putting your used oil in, and taking it somewhere for disposal (OK, Terry, "proper AND safe disposal"). Has a screw-on cap. The box FP ships the gallon jug in is heavy duty, and will be great for re-shipping, say at Christmas time.

And you BITOG kids...remember, don't eat the box, and don't drink or sniff the fluids.

 

[cweed]

VaderSS: I havent spilled even a drop of it yet, would feel really bad about wasting it hehe

 

[satterfi]

LC eats PVC!

I poured some LC in an empty Redline S1 bottle to have a smaller container of LC. After a few days the bottom of the bottle has become very soft.

The Redline S1 bottle is coded 3, which is PVC based plastic.

I'm a bit concerned about the incompatibility of LC and some plastics.

 

[Last_Z]

quote:

---

Originally posted by T-Keith:
FP has a unique smell too. Plus it seems to stick to your hands.

-T

---

When I first took a sniff at FP, I almost passed out. Wanting to make sure I just wasn't very hungry and lightheaded, I took another sniff. SOB!! I almost passed out again. Terry told me it was rocket fuel!

 

[LCD]

quote:

---

Originally posted by satterfi:
LC eats PVC!

I poured some LC in an empty Redline S1 bottle to have a smaller container of LC. After a few days the bottom of the bottle has become very soft.

The Redline S1 bottle is coded 3, which is PVC based plastic.

I'm a bit concerned about the incompatibility of LC and some plastics.

---

Been discussed before
FP melts platic

If you have PVC in your engine I would be concerned