Hello guys,
I am curious to know which oil I should run in my new motor. It is in a 1994 Chevrolet Impala SS.
Forged low-compression shortblock
AirFlow Research LT4 aluminum heads
Melling high volume oil pump
ATI Procharger- not self contained so this will be using the same oil as the engine
The car is driven about 1,000 miles per year. I rarely drive it but when I do it spends a lot of time at 100% throttle.
This setup makes 501 rear wheel horsepower.
For the break-in period I was running Valvoline 10w30 and an AC-Delco filter. Now that the break-in is complete should I switch to something synthetic? I ran Mobil 1 in the stock engine. The car sits in an air conditioned/heated garage. Here in NC the weather is moderate and very humid. If anyone needs additional info let me know.
I would appreciate any help.
I am curious to know which oil I should run in my new motor. It is in a 1994 Chevrolet Impala SS.
Forged low-compression shortblock
AirFlow Research LT4 aluminum heads
Melling high volume oil pump
ATI Procharger- not self contained so this will be using the same oil as the engine
The car is driven about 1,000 miles per year. I rarely drive it but when I do it spends a lot of time at 100% throttle.
For the break-in period I was running Valvoline 10w30 and an AC-Delco filter. Now that the break-in is complete should I switch to something synthetic? I ran Mobil 1 in the stock engine. The car sits in an air conditioned/heated garage. Here in NC the weather is moderate and very humid. If anyone needs additional info let me know.
I would appreciate any help.