So I got 4 cap screws to take off to remove this bow thruster motor. You see one at 11 o'clock. There is one at 5 o'clock I cannot see, can only feel.
It's under the relay. The swing of the Allen wrench hits the hull.
Aside from a shorter 6 mm Allen wrench what else can I try?
There is little room between the cap screw on the flange and the motor. Could not get a Allen bit on ratchet wrench.
It's under the relay. The swing of the Allen wrench hits the hull.
Aside from a shorter 6 mm Allen wrench what else can I try?
There is little room between the cap screw on the flange and the motor. Could not get a Allen bit on ratchet wrench.