Went from 0W40 to 5W30 - increased noise

Status
Not open for further replies.
Joined
Apr 13, 2013
Messages
3,296
Location
Out where the buses don't run
I posted some time back about returning to 5W30 after a one-time run of Mobil 1 0W40 in my Infiniti. I had a jug of Quaker State Ultimate Durability 5W30 that I used up and the engine's noisier now. It wasn't this noisy when I ran 5W30 during previous winters. What could a one-time run of 0W40 have done that caused this to happen?
 
Strange, any weight Quaker State Ultimate Durability from 10W30 to 0W20 I have ran in any of my vehicles are superrrrrrr smooth & quiet.
 
Originally Posted By: jeepman3071
Try Pennzoil 5w30 conventional. Quietest oil I've run in a few different vehicles.


You see, I did just that with Pennzoil Conventional 10w30 1 qt used to top off a 10k+ "run" of Val 5w30 (see sig) and it did the same darn thing, put a silencer on that revolver!! and that just 1 quart bottle. Imagine an entire fill of 10-30 or your fav visc. Pennzoil Conventional or is the magic just with the 10-30?!
 
Originally Posted By: 06VtecV6
Originally Posted By: jeepman3071
Try Pennzoil 5w30 conventional. Quietest oil I've run in a few different vehicles.


You see, I did just that with Pennzoil Conventional 10w30 1 qt used to top off a 10k+ "run" of Val 5w30 (see sig) and it did the same darn thing, put a silencer on that revolver!! and that just 1 quart bottle. Imagine an entire fill of 10-30 or your fav visc. Pennzoil Conventional or is the magic just with the 10-30?!


Here we go again...

BTW you can't silence a regular revolver.
 
50.gif
 
Originally Posted By: thorromig
Strange, any weight Quaker State Ultimate Durability from 10W30 to 0W20 I have ran in any of my vehicles are superrrrrrr smooth & quiet.

+1.....When I switched from Mobil 1 Advanced Fuel Economy 0w20.... to Quaker State Ultimate Durability 0w20....my vehicle quieted down considerably and runs very smoothly.

I can't explain the reason (both oils were 0w20), but the change in brand made a heck of a difference in running smoother and quieter.
 
Originally Posted By: SuperDave456
You using the same make and model of filter?

Yep, same Nissan filter. And I ran Quaker State Ultimate Durability 5W30 before and it was, like others have said, a quiet oil.
 
Originally Posted By: mannys9130
Originally Posted By: 06VtecV6
Originally Posted By: jeepman3071
Try Pennzoil 5w30 conventional. Quietest oil I've run in a few different vehicles.


You see, I did just that with Pennzoil Conventional 10w30 1 qt used to top off a 10k+ "run" of Val 5w30 (see sig) and it did the same darn thing, put a silencer on that revolver!! and that just 1 quart bottle. Imagine an entire fill of 10-30 or your fav visc. Pennzoil Conventional or is the magic just with the 10-30?!


Here we go again...

BTW you can't silence a regular revolver.


It's in almost every thread...
 
I think that a fresh fill of any oil is usually quieter than the outgoing oil in a lot of cases.

Also, yes, this thread did escalate fast. I know when I see 06VtecV6 in a thread there's a pretty good chance of a plug for Pennzoil Conventional 10w30.
 
Originally Posted By: mannys9130
Originally Posted By: 06VtecV6
Originally Posted By: jeepman3071
Try Pennzoil 5w30 conventional. Quietest oil I've run in a few different vehicles.


You see, I did just that with Pennzoil Conventional 10w30 1 qt used to top off a 10k+ "run" of Val 5w30 (see sig) and it did the same darn thing, put a silencer on that revolver!! and that just 1 quart bottle. Imagine an entire fill of 10-30 or your fav visc. Pennzoil Conventional or is the magic just with the 10-30?!


Here we go again...

BTW you can't silence a regular revolver.

LOL!

It never ends...

~ Triton
 
Status
Not open for further replies.
Back
Top Bottom