Walmart for oil change?

Everybody here gets your question, but remember, there are many who are mechanically disinclined.
Also remember that numerous dire outcomes are part of automotive 'advice packages' they grew up hearing.

Ever do an oil change for/with someone who shows up with a Crescent wrench and a roll of paper towels...and nothing else?
I can see both side. I help my young adult daughter maintain her vehicle. She works or goes to school 6/7 days a week so I have no problem helping. There is a point though where helping can be unhelpful. And that is when it becomes enabling laziness or incompetence. That’s gonna be different for every person/situation. I have other family members (not immediate) who are not mechanically inclined, and I don’t help them whatsoever. They’ve got the money and time so they can sort it out for themselves.
 
How old are these kids that they can't figure out where to get an oil change?
Him 25, her 24. He moved to that area just over 4 months ago, her just over 2 months ago and haven't really needed anything car wise. Me as the OCD BITOG dad made sure both vehicles were ready before they left. He had my car for 2 months as his needed a windshield and some other stuff I wanted to do first. When you know nothing in the area and haven't searched for recommendations where do you go first? He's as much if not more OCD than me. He would hate to go to a crappy place, get a stripped plug or have other issues and feel he let me or himself down by not doing it himself. He just doesn't have the couple things or place to do it himself.

We did all other maintenance together on it (and others) over the past years. When her parents independent trusted shop charged $140 for the cabin filter and we had to remove the filter to get the leaves out from blower they were pissed. When the semi-syn Kendal was in for 6k and smelled like raw fuel almost making you throw up under vehicle was last time it was there.

When I was 26 and moved to where I am now, I was in same position for shop search if I needed (not OCI's). My dad had all the contacts state wide as he was automotive instructor for ConEd, had his own business teaching all NY STEP class and helped write (now ASE) tests. His license plates were NIASE 1 and NIASE 2 for those old enough to know when it was NIASE. He said go to one of these 2 shops, both are 15-20 minutes away. I still use them 30 years later and recommend to others.

That is his reference on where to look and what to look for. He also knows all the upsell things (she doesn't) and knows what he can do himself easily. Dealerships sadly are often worse than other places for that and people that don't know IMO.

I do the oil changes for my son’s vehicles.

I want it done correctly and they don’t like working on their vehicle.

Fumoto valves make it a breeze to do oil change when they’re visiting with grandkids.
When they come back up here for holidays that is not an issue. The 8 hour, 500 mile away is the issue. I believe when he visits @Astro14 still does his kids oil changes and they are pretty far away from him.

use the dealership
The Hyundai and Kia dealerships near him are actually further away than Walmart. I didn't call them (yet) to check on price and if you can bring your own oil. Again it's on Valvoline Restore and Protect and we want to stick with that. If they charge $50+ for labor for you to bring your own oil, doesn't lean toward budget option. I would hope that if you brought the oil that they would use it in your vehicle. I have heard the many stories of the mechanic that says no problem, then puts that nice oil on the side of his box for later and fills you with bulk oil.

Everybody here gets your question, but remember, there are many who are mechanically disinclined.
Also remember that numerous dire outcomes are part of automotive 'advice packages' they grew up hearing.

Ever do an oil change for/with someone who shows up with a Crescent wrench and a roll of paper towels...and nothing else?
My son was doing oil changes with me here at home. It was really at the point I was just handing him a tool or two and keeping him company and cleaning up. He was actually using a torque wrench set at 30 ft/lbs for drain plug on the vehicles we have that don't have Fumoto or Valvomax.

If that Tucson has the NU 2.0 engine, no more than a 4K interval. Is it using oil?

I have shared my 2019 Tucson story here before, bought it used during COVID (very limited choices in 2021.) Had 36K on it. Was blowing oil by the rings already. Not bad, but definitely was. Wife drove it almost 2 years and then we sold it. Bought her a 2024 CX-5.
Yes 2.0 NU. No oil usage. The problem up here in NY was gaining oil volume from fuel dilution and getting higher on dipstick. The 4k should work out to about 6 months so that will be current plan based on UOA and knowing that it at least reaches temperature on the daily work drives.
 
Last edited:
highly doubt that's their bulk oil, if one is willing to pay the upcharge for restore and protect.

last i knew walmart tire and oil centers were using fram core's. could also be purolator. probably depends on locations and availability.
No problem paying for the Valvoline Restore and Protect which is their "premium" service. It's more the having someplace that will actually use it. Again searching closer places to bring your own is more expensive AND questionable quality from online reviews. Skip the actually getting them to answer phone first issues.

The service rep said if he brings the filter he wants then they it would be the "regular" synthetic cost as it's just oil and labor.
 
How old are these kids that they can't figure out where to get an oil change?
Did you read ? OP said his son has been asking for recommendations on shops, but he seems to believe he must use a specific oil (and possibly filter), reinstall a magnet, and get oil samples for analysis. Otherwise, the son or daughter-in-law would just go to regular shops or quick-change places and get it done and be happy.
 
Maybe look for an independent shop to do it. I definitely would not use a chain place especially having first hand experience working there and I’m in Virginia too. I don’t know about Walmart but stay far away from Jiffy Lube and Valvoline. Take5 maybe ok I’ve heard good things about them.
If he was closer to Roanoke I might have some confidence in finding somewhere for him to bring it for service. ;) 🤗 😁

Unfortunately that's 4 hours / 220 miles away.
 
Walmart paid for a new 4.3l engine in my sister's old S-10 because they didn't tight the drain plug so the engine puked all the oil out the plug driving down the highway. I don't think I've ever really heard of someone getting an oil change at Walmart aside from that, personally, anyways. I mean, I know people do in general but no one I know personally.
 
My family has had some good and bad experiences using Walmart for oil changes. Most recent was very good on our F150. Several years ago, a family friend had a bad experience in SE Kansas. They had to pay for a carpet cleaning as the tech was very careless and stained the auto carpets. Overall mostly good experiences. Of course, the quality varies with the actual techs doing the job each time.

This last oil change, the oil filter was a Fram CORE. You may also get a credit for not using it by bringing in your own or purchasing a different filter from them.
 
I'm going to go with the motto of "If you want it done right, do it yourself."
The few times that I've used WalMart for tires have been regrettable, from overcharging to not having anybody able to drive in a car with a manual transmission. My last set of tires from Walmart got me out the door at 11:30 from an 8:00 appointment. One of the most memorable WalMart episodes was where I needed a 13" car tire on a car rim that I carried in. I verified the tie size, called in to verify that they had one in stock and gave them the rim to install a tire. After about 30 minutes their tech came in and said he couldn't get the tire on and that I absolutely gave him the wrong size. He couldn't get the tire on. This will not be believed by a few people here, but they let me walk out to their tire machine, allowed me to look at the correct size of tire and I had the tire on the rim in about 10 seconds. (FYI, I occasionally installed tires at a car dealership and I know how to run a tire machine) The guy just looked at me wondering how I got it on and he couldn't. I looked at him wondering why he couldn't get the correct tire on the rim. I don't know what his problem was.
As far as the "take it to the dealership" suggestions, the lube guy at the dealership may not have ever gone to school to be an auto tech and the pay to the lube tech might be just above minimum wage. When I bought an '88 Cougar new off the showroom floor, the dealership threw in "free oil changes for life" that they would not delete. I took them up on that the very first oil change and they stripped the oil plug. Never had anybody else change my oil again.
 
When my niece needs an oil change I usually go with her so she doesn't get hit with a bunch of upsell services . We used a Take-5 near my house this last time and this location uses an oil vac . After they refill the guy shows you the dipstick to verify correct oil level . Kind of pricey but her Dad was paying for it .
 
I almost never have my oil changed, but I recently had to have my F150 changed at Walmart as a gorilla with powertools must have installed the previous oil filter. Everything was okay with the Walmart change as I provided my own oil and filter, but I was surprised to learn that my Walmart (and they said this was now company policy--I don't know) did not pull the drain plug. They used an evacuation pump to pull out the old oil through the dipstick tube. They said their experiences with plastic drain pans and plugs made them go to the policy. Don't know if this matters to you, but in case it does, I'd ask first and see if this is the case at your Walmart.
I know that the oil extractor's do not work on my 2014 Ford F-150 5.0. Not sure what year your F-150 and an oil extractor will not work on lot's of vehicles due to baffles or obstructions between the bottom of the dipstick and the oil pan.
 
Did you read ? OP said his son has been asking for recommendations on shops, but he seems to believe he must use a specific oil (and possibly filter), reinstall a magnet, and get oil samples for analysis. Otherwise, the son or daughter-in-law would just go to regular shops or quick-change places and get it done and be happy.
Not so sure on "seems" to believe. More so given instructions on use "this" with "this" to hopefully keep investment running well longer not burning oil. If I'm alive and those options are not available, call me for choice B options. If I'm gone, well hopefully he'll come to BITOG and ask what he should use, thick or thin, best filter and what OCI. Hopefully have a house and garage by then or make enough money that if choices were wrong it's not a financial issue to replace and try again. 😁 😁 😁
 
I know that the oil extractor's do not work on my 2014 Ford F-150 5.0. Not sure what year your F-150 and an oil extractor will not work on lot's of vehicles due to baffles or obstructions between the bottom of the dipstick and the oil pan.
Won’t work on a 2011 Durango with the 5.7 v8 either… will work on a Pentastar though!
 
Yes, I used it all the time on my wife's Jeep GC and my son's Jeep Cherokee. It works on a 2012 Honda Civic 1.8 and on the automatic transmission. I hope it works on my new Ford Maverick hybrid that has a build date of September 29th.
Ignore the mess, it has since been cleaned/burned 😅
IMG_9658.webp
 
There is nothing wrong with a WalMart oil change.
First of all, generally people working there tend to be somewhat mechanically inclined in the first place shadetree style.
Second, they have done more oil changes than most, and oil changes are not hard to do.
Third, they have their procedures with supervision and don't deviate from them.

Any quick lane oil change spot is fine. I have went through them with my work vehicle all the time for 20+ years and have never had an issue they caused. Other than the one time I had to wait an extra 15 minutes because they were out of stock on my oil filter. They made a quick run to the nearby parts store and viola, even ended up with a WIX on that deal.

I do change my own oil in my own vehicles because I like doing it and it's cheaper for my growing fleet, I swear my yard is beginning to look like a used car lot after the kids started driving. But if you can't, don't fear the WalMart oil change lanes.

Oh, and yes I used to work at a WalMart long ago, not in the service area then but I got to know the guys there. They were solid and did a good job.
 
Trust no one except yourself. Recently, I removed my Toyota filter housing that I previously torque to specification at 25 Newton-Meter. Maybe it actually at 26 N-M and it was a bear to get off.
I mark mine so I can see how much the dealer over torques it. Without fail, dealer puts it past my marks. Makes removal time consuming. I mean, all changer has to do is line up the marks?
 
Never had a WM OC and never will. When I can no longer do them it will be a private shop that I trust.
 
My son is in an apartment complex in VA. He doesn’t recall anything about not being able to work on vehicles but doesn’t want to create issues either. Most of the spots are sloped towards drains so being level is also an issue and he doesn’t have ramps. His wife’s ’21 Tucson is on a 3k / 6 month maintenance minder setting from the very short trips she was doing here in NY and past used oil analysis. Her job is now 14 miles / 20 minutes from the apartment and they use it for other drives around and trips so it should better with the fuel dilution issues she had. I’d like to change the MM to 4k, maybe 5k but still 6 months if UOA shows OK. The trips and travels they have done and have planned will put her at about 7k / 7 months before I can get to it again at the holidays.

I cringe at having him take it anywhere commercial for OC but life is what it is. I worked the pit at Jiffy Lube for extra cash when young. Most of the guys I worked with were OK and actually did care some. The cars we got from other places with stripped plugs etc were scary. These days who knows. I called multiple places by him, some that didn’t even answer phones so they are off the list. Some I called didn’t get great reviews in general but at least answered. He’s asking the people at his job where they go if they don’t do it themselves to try and get some recommendations, also in case of other future needed maintenance. Many car care places I searched close to him were questionable from reviews but I think that sadly is everywhere these days. The Tucson is on Valvoline Restore and Protect 5W-30 and I want them to keep using that knowing the Hyundai motor/ring issues. The couple shops that seemed possibly OK, including Valvoline Express / Instant don’t carry Valvoline Restore and Protect. They said they would put it in if he brought it as well as filter. They would only charge labor of $53 so he would be $100 total for OCI bringing his own stuff.

Walmart 15 miles from him has and uses Valvoline Restore and Protect. Service guy I spoke to said if he brings his filter choice they will use that or they can use their stock which I think is Purolators. They said with his filter, their oil and labor, $57 total. He will have 2 factory Hyundai/Kia filters later today. They also said no issues with giving him back old filter (with Filtermag on it) and pulling a sample while draining so I can send it in. He also will have a spare Filtermag to have them install with the new filter so they can leave one on the old for me to cut open and check.

I don’t think Walmart is a bad choice for him, change would be documented with receipts and I think car-fax also. At least while under factory warranty I plan to have them keep it on factory filter which is Mann&Hummel from Korea. No clue on actual efficiency but seem well built from the ones I cut open so far and nothing dealer could complain about if issues.
Any oil change is better than no oil change. I am sure 99% of the time the quick oil change places have zero issues. Even at a dealer the guy doing the oil changes is not a mechanic with 20 years experience.

Some change oil in Walmart parking lot. Some use a curb as a car ramp. Can he get under the vehicle with no ramps? Install a Fumoto valve and then you can basically just reach. You don't need to see the drain plug.

When I lived at an apartment I changed oil in the parking lot. I kept the oil chain pan behind some bushes. It was a cheap one if found. I once changed spark plugs and needed an air compressor to blow some stuff out. The apartment manager helped me.
 
Back
Top Bottom