Quaker State Higher Mileage 5w30 Red Bottle
0 Aluminum
0 Chromium
0 Iron
0 Copper
0 Lead
0 Tin
66 Molybdenum
0 Nickel
0 Manganese
0 Silver
0 Titanium
3 Potassium
100 Boron
2 Silicon
0 Sodium
1130 Calcium
4 Magnesium
363 Phosphorus
458 Zinc
0 Barium
.
63.9 SUS Viscosity @ 210 F
11.31 cSt Viscosity @ 100 C
420 Flashpoint in F
0.0 Insolubles%
7.6 TBN
Additive levels seem way too low for a PCMO, especially a High Mileage version. Blackstone re-ran oil & results were the same (actually a little lower). 5 years ago today, ToyotaNSaturn, I believe, ran a VOA of Pennzoil High Mileage 5w30, and it showed very low levels of additives also.( I am unable to create a link, any help?) I think that oil was eventually checked by pennzoil, and was found to have generous amounts of p,zn,& ca. Do you think that there is something in SOPUS High Mileage oils that are affecting the readings of Blackstone's equipment? I do not know. Hoping some knowledgeable BITOGers can unravel this mystery.........Thanks all.......jringo
0 Aluminum
0 Chromium
0 Iron
0 Copper
0 Lead
0 Tin
66 Molybdenum
0 Nickel
0 Manganese
0 Silver
0 Titanium
3 Potassium
100 Boron
2 Silicon
0 Sodium
1130 Calcium
4 Magnesium
363 Phosphorus
458 Zinc
0 Barium
.
63.9 SUS Viscosity @ 210 F
11.31 cSt Viscosity @ 100 C
420 Flashpoint in F
0.0 Insolubles%
7.6 TBN
Additive levels seem way too low for a PCMO, especially a High Mileage version. Blackstone re-ran oil & results were the same (actually a little lower). 5 years ago today, ToyotaNSaturn, I believe, ran a VOA of Pennzoil High Mileage 5w30, and it showed very low levels of additives also.( I am unable to create a link, any help?) I think that oil was eventually checked by pennzoil, and was found to have generous amounts of p,zn,& ca. Do you think that there is something in SOPUS High Mileage oils that are affecting the readings of Blackstone's equipment? I do not know. Hoping some knowledgeable BITOGers can unravel this mystery.........Thanks all.......jringo