Transmission cooler 95 grand prix

Status
Not open for further replies.
Joined
Sep 7, 2010
Messages
2,235
Location
Oswego, IL
I have a 1995 grand prix 3.1L. It has a transmission cooler built into the radiator in the passenger side. It has a hole for the fluid in the top and bottom of the passenger side water tank. Does anyone know which of these holes is the inlet(from trans) and which is the outlet (to trans)? It looks like the hot fluid goes into the bottom and comes out the top. Can anyone confirm this. I need to reattach these lines and I don't know which goes where. My service manual is unhelpful. It just says "attach lines."
 
It shouldn't matter-the radiator tank/coolant should all be roughly the same temperature. Surprised the lines aren't "pre-bent" so that you can tell which line goes where.
 
“Hot fluid in the bottom, cool fluid back to the transmission up top.”

My 96 Regal is the same.
 
Originally Posted By: bullwinkle
Surprised the lines aren't "pre-bent" so that you can tell which line goes where.

I looked and looked for the hoses, I could not find any. Every auto shop had the transmission side, but not the radiator side. The tubes were leaking and I ended up making my own.
Originally Posted By: sciphi
It should be the same as my Buick. Hot fluid in the bottom, cool fluid back to the transmission up top.
I thought it was that way, but I wanted to make sure. Turns out that's right! Hot fluid in the bottom cool fluid comes out the top! Thanks for the replies.
 
Status
Not open for further replies.
Back
Top Bottom