I got it now !The tcw3 reduce the evaporation of gas infact i could not go to 1:500 mix as many do i went 1:600.
Where i live is cold and i had problem at start of engine. The acetone compensate the side effect of tcw3.
I got it now !The tcw3 reduce the evaporation of gas infact i could not go to 1:500 mix as many do i went 1:600.
Where i live is cold and i had problem at start of engine. The acetone compensate the side effect of tcw3.
Good question I tried many and I found the best Tcw3 on my opinion ,very robust oil, the brand is Mystik and the type is All In One .....the best
Maybe it's just too thick at that temperature for fuel pump/injectors? In that case I'd probably just go without or lower mixture like you said. I'm still skeptical about the acetone though.The tcw3 reduce the evaporation of gas infact i could not go to 1:500 mix as many do i went 1:600.
Where i live is cold and i had problem at start of engine. The acetone compensate the side effect of tcw3.
Most of us go 640:1.The tcw3 reduce the evaporation of gas infact i could not go to 1:500 mix as many do i went 1:600.
Where i live is cold and i had problem at start of engine. The acetone compensate the side effect of tcw3.
yes, horrible results do not use it very expensive too.You were once using Amsoil Interceptor?
Many use plain acetone in the gas, and take in consideration that there are aromatics in the gasoline anyway.Maybe it's just too thick at that temperature for fuel pump/injectors? In that case I'd probably just go without or lower mixture like you said. I'm still skeptical about the acetone though.
Sure, okay.Many use plain acetone in the gas, and take in consideration that there are aromatics in the gasoline anyway.
I tried a mix with tcw3 acetone and toluene, toluene has 120 octane and has a lot of energy in fact is the formula 1 fuel, but i removed toluene for 2 main reasons:
1) smell bad and is toxic, very bad when you do the mix.
2) has low evaporation.
And is very corrosive on the gums.
Now only acetone the engine goes better more responsive and still the gas is stable since I use regular gas ,rubbish.
Is not so toxic and no so corrosive on the gums as well.
Really? Amsoil is horrible you say? You should probably tell them about this.yes, horrible results do not use it very expensive too.
yes good ratio i go between 1:600 and 1:650 more than that I start to have down sides.Most of us go 640:1.
I used to use their oils, the best on the market,so I told to myself if I use Interceptor is going to be great,no way the car was going horrible.Really? Amsoil is horrible you say? You should probably tell them about this.
If it's so corrosive on the gums you probably shouldn't be drinking it thenMany use plain acetone in the gas, and take in consideration that there are aromatics in the gasoline anyway.
I tried a mix with tcw3 acetone and toluene, toluene has 120 octane and has a lot of energy in fact is the formula 1 fuel, but i removed toluene for 2 main reasons:
1) smell bad and is toxic, very bad when you do the mix.
2) has low evaporation.
And is very corrosive on the gums.
Now only acetone the engine goes better more responsive and still the gas is stable since I use regular gas ,rubbish.
Is not so toxic and no so corrosive on the gums as well.