Originally Posted By: Phishin
Originally Posted By: wtd
Here are the upgraded Bosch injectors that are usually recommended for replacing the stock ones. Looks like everyone is selling remans these days but for the price and a five year warranty, not a bad price to try them out.
http://www.ebay.com/itm/5-Yr-Warranty-Ge...a5c&vxp=mtr
Wayne
These seem impossibly cheap. I don't remember the exact figure I paid Trav for his matched set of injectors, but it wasn't this cheap.
Trav, you want to chime in here? Trav is a stand up guy, so I'm sure there is a reason why his injectors are much better than these.
Phishin, yours were brand new not cleaned, unfortunately the stock of these is long gone.
Ebay sellers for the most part use cores bought in barrels by the pound. The problem with these is there is no way of knowing what mileage they have one them or even if any came from the same engine.
I don't buy bulk cores i get them known low mile engines that are still wet. Cores of this caliber cost a lot more but they produce a better result.
A lot of guys have the machines but only test them static not the whole program, static only is not very good but running them in auto mode results in a lot more units out of spec.
These Ford/Bosch units flow the 19lbs but fit better with a little work of the seats.
I keep a few good ones in stock to match any of the set that isn't within 1% OE is 3%.
Edit: The ebay ones shown are not stainless or rebuilt. there is no such animal with this type of injector. You can only clean them, the bodies are steel and plastic.