I replaced all 4 struts & strut mounts on my 97 Camry last week. I got it realligned. Everything feels and sounds great with the ride.
The steering does seem a little stiff. I mean a very little bit stiffer than before. There's a bit of steering memory too. The new bearings were hard to rotate before I installed them, I noticed. So I'm guessing it all will loosen up here shortly.
Any advice on this? Would you focus on retorquing the three strut mount nuts, the large strut shaft nut, or maybe even the sway bar link nut. Is there a chance that I'll ruin the bearing if anything is slightly over torqued?
Thanks.
The steering does seem a little stiff. I mean a very little bit stiffer than before. There's a bit of steering memory too. The new bearings were hard to rotate before I installed them, I noticed. So I'm guessing it all will loosen up here shortly.
Any advice on this? Would you focus on retorquing the three strut mount nuts, the large strut shaft nut, or maybe even the sway bar link nut. Is there a chance that I'll ruin the bearing if anything is slightly over torqued?
Thanks.