Replacing balljoints in my truck and manufacturer recommends a 5% moly grease, preferably synthetic. I can find a few that are 5%, but the only issue i see is that alot of them claim to only be good to around 0 degrees. Finding quite a few synthetics, but none with a 5% moly. Easy to get is another big plus.
Recommend me a grease
- Thread starter kawakx125
- Start date
Schaefer 274 or 219. 238 is excellent also but pretty thick for cold weather.
I’ve had good luck with the Chevron ESI HD 5%. It’s good down to -15 Fahrenheit. I use it on my backhoe.
Here is the #2, I can only find it in cases and not single tubes.
buy.chevronlubricants.com
Tubes of #1 look to be available from NAPA as special order:
Here is the #2, I can only find it in cases and not single tubes.
Delo Grease ESI HD Moly 5% EP 2 Tube Case | Delo | Brand | Shop Chevron Lubricants (US)
buy.chevronlubricants.com
Tubes of #1 look to be available from NAPA as special order:
Will second the Delo ESI 5%. Curious what kind of truck do you have that recommends 5% moly?
its not the truck that recommends it, its the aftermarket balljoint MFG. EMF recommends 5% moly grease, preferably synthetic
You can buy single tubes on Amazon, eBay, etc.
they are going to be installed by me