The OEM batteries in our truck are just past 5 years old and likely are nearing end of life. Should I bother testing them or just replace? If you think I should test them, please recommend a good automotive battery tester.
Recommend battery tester for group 48 batteries
- Thread starter wwillson
- Start date
I have both the "fancy" and the carbon pile testers, and I prefer the carbon.
They're all from the same factory, so here's a sketchy one from Aliexpress.
Obviously disconnect your interconnects so you get results for each individual battery, no matter what tester you use.
They're all from the same factory, so here's a sketchy one from Aliexpress.
Obviously disconnect your interconnects so you get results for each individual battery, no matter what tester you use.
f355spider
$50 Site Donor 2026
Carbon pile tester is the gold standard, but these work decently enough and highly rated by users and the Project Farm guy, if you want to search for his review on testers from a while back on YouTube. Ancel BA 101.
https://a.co/d/059uK4xq
Simple to use as well. I have purchased at least 8 of them and give them out as gifts to family and friends.
https://a.co/d/059uK4xq
Simple to use as well. I have purchased at least 8 of them and give them out as gifts to family and friends.
Last edited:
This TOPDON BT 200 is great if you want to splurge. The ANCEL BA101 is good at half the price. Both might be on sale for Prime Days next week.
I have the Ancel, which was cheap (<$20 at the time), and does provide some data.
But keeping in mind its limits as a conductance tester, the conclusions it provides are no better than the simple household battery testers with the green/yellow/red scales to indicate the health of a cell based on its sole measurement of unloaded voltage.
But keeping in mind its limits as a conductance tester, the conclusions it provides are no better than the simple household battery testers with the green/yellow/red scales to indicate the health of a cell based on its sole measurement of unloaded voltage.
^^^this^^^
AZjeff
$50 Site Donor 2023
I bought the ANCEL a couple of months ago on BITOG recommendations. The numbers it generated were very close to what the Batteries Plus tester and a parts store tester showed. Be aware it's very sensitive to a good solid contact of the clip on the battery terminal.
I also have the Ancel tester, paid $<20 and it works quite well. Sure there not a carbon pile tester but there quite accurate for what they are especially with a little knowledge.
Likely the most telling piece of info they give that most ignore is the internal resistance. Generally your looking for <5 milliohm. A little more is OK but much past and the battery is likely too sulphated for long term continued use.
Likely the most telling piece of info they give that most ignore is the internal resistance. Generally your looking for <5 milliohm. A little more is OK but much past and the battery is likely too sulphated for long term continued use.
BrendanC
$100 site donor 2024
i get squirmy with old batteries. i’ve been the one asking for a jump in a parking lot before and it’s not the best feeling. Everstart platnium from walmart and be on your way
f355spider
$50 Site Donor 2026
A reliable battery tester can be your best friend. I have had at least one for over 20 years. By testing a couple times a year, I have caught batteries that were getting weak, but not yet showing signs from simply performing a cold start. And on the flip side, I have got over 14 years out of one battery before it started showing some weakness on the tester. Currently I have two over 8 years and one over 7 years and all test fine still.
