Has any one used or considered using the Q racing oil from Quaker state? I was looking at the 15W50 and the 17.5W35. I am looking for something with sufficient zinc, ect. for flat tappet cams. Iv'e also heard of people using the Shell rotella 15W40 or the adding a bottle of GM EOS to every oil change. I know there are a lot of posts on here about oil for flat tappet cams, but I was just seeing if anyone has an opinion on the Q racing oils and if they have the additives for flat tappet cams....
Q racing oil
- Thread starter TAbird79
- Start date
- Status
It has more than enough additive for flat tappet cams, but good luck trying to find this stuff. When it was first introduced it was only avaliable i 5 gal pails.
Thier website says it was to be available in quarts by fall 05'. Are you saying you havn't seen it anywhere?
I found this in an article on the web:
Q Racing motor oil is available by calling Performance Products at 800-789-1966. Q Racing is sold in 5 gallon containers and cost approximately $32 per gallon plus freight.
QUAKER STATE® TURNS UP THE HEAT WITH Q®
Q Racing motor oil is available by calling Performance Products at 800-789-1966. Q Racing is sold in 5 gallon containers and cost approximately $32 per gallon plus freight.
QUAKER STATE® TURNS UP THE HEAT WITH Q®
- Status
Similar threads
