Post your latest oil change

2022 Tahoe 4WD @ 32k
Out: AC Delco 0W-20
In: Mobil 1 Advanced Clean 5W-30
Left PF63 on

IMG_2421.webp
 
I initially used Quaker State ultimate durability 5w30 but switched to the euro probably 5 or so years ago
That Quaker State Ultimate Durability must be good stuff then! Another good result with Euro oils here. Seems like it's hard to keep those Theta II engines from burning.
 
22 Sienna, just rolled over 65k miles
Out: 4qt of Ravenol Wiv LL2 0w-30 4qt +1 qt Magnatec 5w-20+ LM MoS2 after 5k miles
Fram Ultra Cut open, looks perfect, just rather small, no sign of metal shaving where the silicone magnet band was sitting, at all. Oil will go to ASL via the Wix kit for analysis.
IN: another leftover Frankenbrew(trying to use up oldest oil first, and my stash in general): 2 qt of GC 0w-30 (SL, not green), 2 qt of Magnatec 5w-20 (SN), + 1qt Napa 0w16 (SN) + LM MoS2 and regular Fram OCOD. (keeping silicone gasket filters for the "winter" runs).
 
Last edited:
2018 Tacoma OR 4x4 with 99115 miles on truck 3520 and 8 months on Valvoline restore and protect 0w20

In 6 qts Valvoline restore and protect mostly 5w30 and a fram titanium filter.

Used a new oil drain pan and the oil came out hot and fast. Noticed
Some thicker carbon colored oil on the bottom of the pan and in filter housing.

The last 30-40 k has been on Mobil 1 0w40 this was the first run of calvoline restore and protect. Now the second fill of restor and protect. Truck runs good regardless.

IMG_9554.webp


IMG_9553.webp


IMG_9550.webp
 
2010 Tiguan owned since new with 179.8k kms, 9k kms on oil change.
Out: Liqui Moly 5W-30 4200/OEM filter
In: First dose of Valvoline Restore and Protect 5W-30/Mann filter

Forgot to take a pic while changing oil so had to stage it when I finished up…

View attachment 339206
Another Eurocar getting the goodness of Restore & Protect!
 
2025 Subaru Forester Sport Hybrid 5921 miles
Dumped OEM fill at 1k

Out: Valvoline Extended Protection 0w-16
Off: OEM filter

In: HPL 0w-20 Premium Plus 4.6 quarts
On: PG4615ex oil filter

Gonna run with HPL for at least 6 OCI's

Sent sample in at 5500 miles and awaiting results. Will cut open OEM filter as a curiosity n post.

As an aside...I used extractor first and got 4 quarts. Drained rest from fumoto valve and got ~3/4 quart. Was on level ground...next time use the ramps to compare.
 
Back
Top Bottom