I have a light knock that started recently in my 4200 Vortec. Fairly confident it's a rod, going to pull the pan and take a look.
I have new STD bearings from GM, if the journal checks out with a mic, could I polish it while in the motor and if so, what is a prescribed method for doing this.
Granted it depends on condition of journal but hoping for best-case scenario.
I have new STD bearings from GM, if the journal checks out with a mic, could I polish it while in the motor and if so, what is a prescribed method for doing this.
Granted it depends on condition of journal but hoping for best-case scenario.