Peeled veneer paint on vintage Pioneer

Messages
3,015
Location
America
I just got a vintage Pioneer receiver. The seller has attaches the cord with a masking tape to the body. When I removed the masking tape, some of the veneer came off. It's not really a veneer but a layer of paint on a plastic panel. How would you glue this paint back on? You can see the peeled area at the bottom of the attached picture and the peel is placed on top. It's a very thin film.

IMG_20200708_133900.jpg
 
Messages
1,116
Location
Arizona
At AZ there is 3M contact cement in spray can. Lightly spray on the back of the peeled piece, let it tack then carefully place it
 
Top