Oil sampling through dipstick tube?

  • Thread starter Thread starter DD
  • Start date Start date
Status
Not open for further replies.

DD

Joined
Jun 19, 2005
Messages
82
Location
San Mateo, CA, USA
Okay, I'm sure this must seem like a stupid question, but how does one extract an oil sample through the dipstick tube?

I gather it's siphoning procedure of some sort, but I'm not sure what the steps are or what equipment is needed.

Thanks,

DD
 
Hi,
we use a suction pump to extract oil via the dipstick tube

We use this process;
1 - ensure engine is at operating temperature
2 - clean around top of tube
3 - insert plastic hose (take care-hot oil!)
4 - extract around 200ml of oil - discard
5 - use a new container - extract sample
6 - remove hose/insert dipstick
7 - clean container 4) above for re-use

I hope this helps
Doug
 
Go to: http://www.amsoil.com

Click on the On-line Store

Click on the Oil Analysis link

Order a "G-1206 Oil Analysis Sampling Pump" and 10' of high temp hose for $24.50

Instructions come with the pump and they couldn't be easier to use....


Tooslick
 
I just placed an order for the pump it says bottle sold seperatly but I don't see the bottle for sale.
cheers.gif
 
DD
I use an old water fountain compressor and a small alum.tank as a vacuum chamber.A compressor from a small refg.will also work.It works great also bleeding brake fluid.
gary
 
Blackstone sends the perfect size sample bottles and a self addressed plastic can to send it to them.You can use the plastic bottles via syphon pump or collect when you drain the hot oil.I usually change the filter if not draining so if I can I fill the filter with clean oil and install. If not just top off.
grin.gif
 
Well I just changed the oil on my wife's 05 Solara this morning and sent it off to blackstone so I should be getting a bottle in return mail. This will be the first time it has had an UOA.
cheers.gif
 
Status
Not open for further replies.
Back
Top Bottom