well after time and time of neglecting my 1991 honda accords o2 sensor i decided to check it today.
i tested it with a voltage meter in the right prong. i took out the harness and then the book (helms) told me to hook it up to "connector D" and checked the voltage at idle.
i did warm up the car prior if your wondering.
as i checked the voltage at idle it was
.04-.05mv at idle, which the book said its good.
yet when i revved it and heled it at 2, 3, or 4000 rpm...it stayed at .06-.07 mv.
now the book said it should fluxuate from idle to 1.0 mv and if it does not then the sensor is bad.
now is my sensor toast? can explain my poorish gas milage.
i tested it with a voltage meter in the right prong. i took out the harness and then the book (helms) told me to hook it up to "connector D" and checked the voltage at idle.
i did warm up the car prior if your wondering.
as i checked the voltage at idle it was
.04-.05mv at idle, which the book said its good.
yet when i revved it and heled it at 2, 3, or 4000 rpm...it stayed at .06-.07 mv.
now the book said it should fluxuate from idle to 1.0 mv and if it does not then the sensor is bad.
now is my sensor toast? can explain my poorish gas milage.