Need Electrical Help!!!
- Thread starter Warstud
- Start date
- Status
Final Update>>>
This morning I took the blower fan in to have checked out. They said one of the bronze bushings is rotating with the shaft. So they replaced the bushings and shaft and had to drill out a set screw because the head broke off. Got it home and discovered they put the pulley on the wrong side. Took it back and they fixed it. Hooked everything up and it's working. ****HEAT****
1)New Motor... $235
2)HVAC Tech... $80 to walk in the door and $50 to wire the motor and tell me the blower fan was bad. $130 total
3)Rebuild Blower Fan...$105
Total Cost $470.......Any guesses as to what it would cost to have the HVAC company do everything?
This morning I took the blower fan in to have checked out. They said one of the bronze bushings is rotating with the shaft. So they replaced the bushings and shaft and had to drill out a set screw because the head broke off. Got it home and discovered they put the pulley on the wrong side. Took it back and they fixed it. Hooked everything up and it's working. ****HEAT****
1)New Motor... $235
2)HVAC Tech... $80 to walk in the door and $50 to wire the motor and tell me the blower fan was bad. $130 total
3)Rebuild Blower Fan...$105
Total Cost $470.......Any guesses as to what it would cost to have the HVAC company do everything?
Assuming that the other motor was actually o.k., I was thinking it might cost around $300 or so to have an HVAC techie fix the blower fan, maybe using one of the generic bearing/shaft repair kits I linked to in your other thread.
It's hard to guess on these things. You did good, and you learned a lot.
It's hard to guess on these things. You did good, and you learned a lot.
- Status
