Need Anything Machined?

Status
Not open for further replies.
T

tom slick

Joined
May 26, 2003
Messages
10,064
Location
Central Coast, Calif.
I'm in a CNC mill and lathe class and need a project. I have full access to both types of machines and CAD/CAM software. If any of you have something you need made I can make it for just a bit more than the price of materials.

There are some limitations of the complexity of the part(s) due to the tooling I have available but I am willing to consider anything.
 
Tom - V8 block from a solid alum billet please!
grin2.gif


http://www.youtube.com/watch?v=QsmiIeAkE-o&feature=related

In my business, EVERYONE needs something machined.
 
We used to have a Haas VF-4 in the shop, but sold a few yrs back. I probably could have pestered my former colleague to learn operation, but couldn't be bothered since I didn't think I'd pursue machining.
frown.gif


Haas_VF4.jpg
 
I used to run and repair Fadal 4020s but never did any design or programming. I am taking this class for fun, I am not planning doing this stuff full time when I grow up.

I am working with a small Milltronics VMC and lathe currently.
 
You could machine aluminum atv air filter adaptors. Almost every atv out there should have one.

Something like this:
big-yfz450proflowkn.jpg

They're for adapting a larger clamp on style air filter. This lets you remove your airbox lid without the filter falling out.
 
Last edited:
Originally Posted By: tom slick
I'm in a CNC mill and lathe class and need a project. I have full access to both types of machines and CAD/CAM software. If any of you have something you need made I can make it for just a bit more than the price of materials.

There are some limitations of the complexity of the part(s) due to the tooling I have available but I am willing to consider anything.


That's a very generous offer. I got my CNC needs covered, though. I have an idea what you may want to do. I'll send you a PM in a while.
 
Originally Posted By: moribundman
I have an idea what you may want to do.


That's not what I meant to post. One can't "do an idea." Yikes.

*smashes pinkie finger with wooden mallet*
LOL.gif



... an idea you may find interesting.
 
Originally Posted By: salesrep
32.gif

How is the machining biz in Ca.?


I don't really know statewide. Around my neck of the woods we have small shops and AFAIK they are doing ok.
 
The tool setup charge for a simple machining job was around $100 last time I checked, which was a few years ago.
 
Yep, and about $50/hr machine time.

For those who don't realize it, The cost of machined parts is seemingly reasonable because the overhead costs are spread out over a run of hundreds or thousands or parts. A one-off part is extremely expensive. I am willing to give my BITOG cronies parts at near cost because I have no overhead (thanks CSU system!) and my payment is projects with a grades.

how about a BITOG key fob?
 
Originally Posted By: tom slick
how about a BITOG key fob?


Don't forget copyright issues!

How about a mori key fob? Make it in the form of a target and it will be a big seller. People can take potshots at it.
grin2.gif
 
Status
Not open for further replies.
Back
Top Bottom