Metric Square Wrenches

[MolaKule]

On Nissans we have the internal wrenching square sockets for the transmission, differential, and transfer case.

Would anyone know of a source for 13mm and 10mm square head tools?

Thanks all.

Mola

 

[XS650]

Too bad they didn't make them 12.7 mm and 9.525 mm.

Here's one you're looking for
http://ultimatetoolco.com/drainplugs.aspx

 

[MolaKule]

Thanks XS650 and you're right.

Now all I need is the 10 mm version for the TC.

Maybe this it it:

http://ultimatetoolco.com/10mmdrainsocket.aspx

 

[SubLGT]

Woohoo, 52 bucks for 2 sockets!

 

[alreadygone]

Originally Posted By: SubLGT
Woohoo, 52 bucks for 2 sockets!

And you wonder why us pros charge you such OUTRAGEOUS labor rates???

Bob

 

[MolaKule]

It might be cheaper for me to just make an Appt. with your shop next time I'm in Atkins.

 

[XS650]

If you have access to a mill with tooling to cut decent alloy steel or the right kind of grinder setup, it would be easy to cut down the male end of a couple of socket drive adapters to make what you want.

 

[AcuraTech]

Originally Posted By: XS650
If you have access to a mill with tooling to cut decent alloy steel or the right kind of grinder setup, it would be easy to cut down the male end of a couple of socket drive adapters to make what you want.


Making tools! Somehow I think my Snap-On rep would frown upon this practice.

 

[ms21043]

Snap On makes the 10mm one, it'll cost you $16.

 

[mechtech2]

Yeah, I'd grind down a cheap short [ratchet] extension to use for the 10mm square drive. It doesn't have to be perfect.
Maybe a 3/8" drive will fit as is.

As for the 13mm square drive, just use a 1/2" drive extension.

 

[SubLGT]

At one time, Mac Tools had a 13mm square socket, but that no longer seems to be the case.

 

[SubLGT]

Originally Posted By: mechtech2
..........As for the 13mm square drive, just use a 1/2" drive extension.


A 1/2" drive is a very loose fit in a 13mm square drain plug. Not good if the plug you want to remove is uncooperative.