Hi all,
I'm about to get back my second UOA from blackstone running AMSOIL for my 06 Civic SI....first was Series 2000 0w30 for 9500 miles and came back beautifully. This recent run was SSO 0w30 for 14500 miles and we'll see how it does.
I'm currently running AMSOIL Signature Series 0w30 in my engine and have, to be confirmed by the UOA, ~10-12k left on it (about 5 months).
I'm thinking ahead and my biggest "problem" with AMSOIL is that my engine still consumes oil. Granted, it's slowed down from 1 quart every ~2500 miles to 1 quart every 4000-5000 miles....but a 15k OCI involves me using [censored] near 9 quarts of SSO. That's making my 15k runs cost me almost $100, including oil filter.
I'm curious to run an RLI oil to see if it reduces or stops consumption further. I'd be looking to do a 10k OCI minimum. Their cost per quart seems a little more attractive and they seem like a quality oil.
But, in my application, I'm not sure which RLI grade is best for me and I'm looking for advice. I'm naturally drawn to a 0w or 5w cold viscosity since I live in PA and prefer a nice, easy start-up. I don't track my cars. I drive ~25,000 miles per year. ~65-70 per day. Almost no short trips. I redline my car a few times a day, but very rarely any prolonged periods near redline.
I'll have ~65000 miles on my engine when this run is done....aside from keeping the K&N air filter clean, this engine doesn't require a tune-up until 105,000 (or when stuff starts acting funny).
0w30, 5w30, or even the "RS4 special" 5w40?
I would most likely do a Blackstone analysis when it's done, for comparison and to keep consistent with past analysis.
Thanks for any/all advice!
Joe
I'm about to get back my second UOA from blackstone running AMSOIL for my 06 Civic SI....first was Series 2000 0w30 for 9500 miles and came back beautifully. This recent run was SSO 0w30 for 14500 miles and we'll see how it does.
I'm currently running AMSOIL Signature Series 0w30 in my engine and have, to be confirmed by the UOA, ~10-12k left on it (about 5 months).
I'm thinking ahead and my biggest "problem" with AMSOIL is that my engine still consumes oil. Granted, it's slowed down from 1 quart every ~2500 miles to 1 quart every 4000-5000 miles....but a 15k OCI involves me using [censored] near 9 quarts of SSO. That's making my 15k runs cost me almost $100, including oil filter.
I'm curious to run an RLI oil to see if it reduces or stops consumption further. I'd be looking to do a 10k OCI minimum. Their cost per quart seems a little more attractive and they seem like a quality oil.
But, in my application, I'm not sure which RLI grade is best for me and I'm looking for advice. I'm naturally drawn to a 0w or 5w cold viscosity since I live in PA and prefer a nice, easy start-up. I don't track my cars. I drive ~25,000 miles per year. ~65-70 per day. Almost no short trips. I redline my car a few times a day, but very rarely any prolonged periods near redline.
I'll have ~65000 miles on my engine when this run is done....aside from keeping the K&N air filter clean, this engine doesn't require a tune-up until 105,000 (or when stuff starts acting funny).
0w30, 5w30, or even the "RS4 special" 5w40?
I would most likely do a Blackstone analysis when it's done, for comparison and to keep consistent with past analysis.
Thanks for any/all advice!
Joe