OK, here's the issue:
Truck: 2007 Tacoma V6, 124,000 miles, bought new June 2007.
Use - normal use, never off-road, except down a gravel road once in a while when I go dirt bike riding.
Serp. belt: Factory. Never been replaced.
Accessories: None have ever been touched. All stock.
Problem 1: Slight squeaking on startup, especially if it's a cool morning. Stops once the engine warms up. Only does it when the engine has been off overnite.
Problem 2: A whine that sounds similar to a failed pwr steering pump, but not as loud. Seems like it's the pwr steering pump. Seems as if it's gotten louder over the last few months. No leaks, never been run low on fluid. Only variable is that I've been changing out the fluid in the reservoir every few months over the last year, using the Turkey Baster method. I just suck out the old, and refill. Been using Castrol Dexron VI.
Not sure if it's the pump or a bearing.
My questions for y'all are: Does this sound familiar to any of y'all? Has anyone had these problems and successfully fixed them?
I don't mind changing the belt. It still looks fine to me, but I don't mind going ahead and changing it. If the alternator failed, I'd definitely change the belt, and probably the tensioner at the same time.
How should I go about diagnosing these noises? Mechanic's stethoscope?
Should I go ahead and change the belt and tensioner since they have 124,000 miles on them?
How hard is it to go ahead and change out the other pulleys? Can I just use a pulley puller to get them out? How are the new ones re-installed?
Any help or advice is appreciated. Thanks guys.
Truck: 2007 Tacoma V6, 124,000 miles, bought new June 2007.
Use - normal use, never off-road, except down a gravel road once in a while when I go dirt bike riding.
Serp. belt: Factory. Never been replaced.
Accessories: None have ever been touched. All stock.
Problem 1: Slight squeaking on startup, especially if it's a cool morning. Stops once the engine warms up. Only does it when the engine has been off overnite.
Problem 2: A whine that sounds similar to a failed pwr steering pump, but not as loud. Seems like it's the pwr steering pump. Seems as if it's gotten louder over the last few months. No leaks, never been run low on fluid. Only variable is that I've been changing out the fluid in the reservoir every few months over the last year, using the Turkey Baster method. I just suck out the old, and refill. Been using Castrol Dexron VI.
Not sure if it's the pump or a bearing.
My questions for y'all are: Does this sound familiar to any of y'all? Has anyone had these problems and successfully fixed them?
I don't mind changing the belt. It still looks fine to me, but I don't mind going ahead and changing it. If the alternator failed, I'd definitely change the belt, and probably the tensioner at the same time.
How should I go about diagnosing these noises? Mechanic's stethoscope?
Should I go ahead and change the belt and tensioner since they have 124,000 miles on them?
How hard is it to go ahead and change out the other pulleys? Can I just use a pulley puller to get them out? How are the new ones re-installed?
Any help or advice is appreciated. Thanks guys.