I have a recently resurrected/rebuilt K341AS Kohler in my C165 Wheel Horse that runs great. However, it is not charging. The original stator measured .6 Ohms and output was 14 volts ac so I replaced it and the voltage regulator at the same time. Now I have 15.5 volts ac at the stator leads and .3 ohms but still no charging at the regulator output. What gives? When I removed the flywheel to disassemble the engine three of the magnets fell out so I glued them back in. Could I have possibly installed the magnets incorrectly? Am I looking at getting another flywheel?