Intek down on power

Status
Not open for further replies.
Originally Posted By: Pop_Rivit
Check your spark. You should be getting a snappy 1" spark from the wire. If you're not, then it's probably the coil. If you are, then it's probably fuel/carb related.


Like Pops said- check spark. It's quick and easy. I've seen them where the terminal inside the wire has rusted away and where the high tension wire itself has burned back and caused all sorts of issues.

I have also seen a Kohler Magnum 18 with a blown head gasket lose power and not mow well- but you could barely hear the combustion gases escaping.
 
Carb needs cleaned. The engine is not getting enough gasoline under load, which means one of the tiny orifices in the carb are clogged.

You've already given it a good tune up, which is the smart, basic things to start with. Now it just needs a carb cleaning. I'd also flush the fuel tank at the same time so you are using fresh gasoline after the carb repair.
 
Carb, spark and loosen the valves to looses end of spec. I NEVER drain the carb. Allows Alum parts to oxidize and form paste that clogs up small orifices.
Now isn't that harder to address than a little gum. I put the OPE away with 1% top oil.
 
I'm sure you checked the air filter, but that would cause this problem. Also check you are getting a full 3600rpm. I have my Intek turned up a little so that it is 3600rpm with the blades engaged. About 3700rpm without. I have a Tiny Tack which reads rpm when running, hours when off.
 
Originally Posted By: silveravant
I'm sure you checked the air filter, but that would cause this problem. Also check you are getting a full 3600rpm. I have my Intek turned up a little so that it is 3600rpm with the blades engaged. About 3700rpm without. I have a Tiny Tack which reads rpm when running, hours when off.


Thanks. Yeah, filter is new.

Do you have a link to the Tiny Tach? Sounds interesting.
 
var·i·a·ble
adjective

1.
not consistent or having a fixed pattern; liable to change.
"the quality of hospital food is highly variable"
synonyms: changeable, changing, varying, shifting, fluctuating, irregular, inconstant, inconsistent, fluid, unsteady, unstable, unsettled, fitful, mutable, protean, wavering, vacillating, capricious, fickle, volatile, unpredictable, mercurial, unreliable; informalup and down
"the weather on the shoreline is known for being variable"

2. able to be changed or adapted.
"the drill has variable speed"
noun

1. an element, feature, or factor that is liable to vary or change.
"there are too many variables involved to make any meaningful predictions"
synonyms: factor, element, ingredient, quantity, unknown quantity, condition
"there are other variables to consider"

Carburetor is a Variable !
 
Originally Posted By: Merkava_4
var·i·a·ble
adjective

1.
not consistent or having a fixed pattern; liable to change.
"the quality of hospital food is highly variable"
synonyms: changeable, changing, varying, shifting, fluctuating, irregular, inconstant, inconsistent, fluid, unsteady, unstable, unsettled, fitful, mutable, protean, wavering, vacillating, capricious, fickle, volatile, unpredictable, mercurial, unreliable; informalup and down
"the weather on the shoreline is known for being variable"

2. able to be changed or adapted.
"the drill has variable speed"
noun

1. an element, feature, or factor that is liable to vary or change.
"there are too many variables involved to make any meaningful predictions"
synonyms: factor, element, ingredient, quantity, unknown quantity, condition
"there are other variables to consider"

Carburetor is a Variable !


I'm afraid I don't get the connection, but thanks for your service.
34.gif
 
Compression = Constant
Ignition Timing = Constant
Valve Timing = Constant
Governor = Constant
Carburetor = Variable (because of its complexity and its susceptibility to fuel contamination)
 
Status
Not open for further replies.
Back
Top Bottom