Last fall I jacked up the axle of my boat trailer with a HF 8 ton bottle jack on 2x6. Pulled the wheel and hub and planned on replacing the bearings, races and seal. Well it got put aside. Yesterday I put on the hub but the HF jack was frozen and it and the 2x6 it was on were 4" down into the dirt. Bought another HF jack and jacked the axle, pulled the frozen jack and installed the wheel.
Brought the frozen jack into garage and poured MMO onto the main jack piston and the piston you pump. Waited 8 hours and it's free and works fine.
Would any oil or PB Blaster have worked as well??
Brought the frozen jack into garage and poured MMO onto the main jack piston and the piston you pump. Waited 8 hours and it's free and works fine.
Would any oil or PB Blaster have worked as well??
Last edited by a moderator: