Ecogard X4610 on PRIME

D16A6_Driver

D16A6_Driver

Joined
Mar 10, 2025
Messages
79
Saw this price drop on Amazon.
Ecogard X4610 oil filter. I use these on my 2011 Hondas and is one of the Premium Guard sub-brands. I received some back in March and were made in China. These are taller than the shorter Honda PG4612 filters. $2.48 is a decent price for a well made filter. Subscribe and Save discount available. Currently shipped and sold by Amazon.com.

ECOGARD X4610 Premium Spin-On Engine Oil Filter for Conventional Oil Fits Acura MDX 3.5L 2003-2020, RDX 3.5L 2013-2018, TSX 2.4L 2004-2014, MDX 3.7L 2007-2013, TL 3.2L 2004-2008, TL 3.5L 2007-2014

https://www.amazon.com/dp/B00AKEV7L2 (non-affiliate link).
 
Funny timing. I was just looking for filters for a Kubota diesel and this post reminded me I had bought the 12pk last year or so when it was crazy cheap. Right thread, but a smidge smaller diameter. Curious to see if this will fit still!
 
Duckless said:
Funny timing. I was just looking for filters for a Kubota diesel and this post reminded me I had bought the 12pk last year or so when it was crazy cheap. Right thread, but a smidge smaller diameter. Curious to see if this will fit still!
Click to expand...
4610 & 12 have same threads and gasket diameter. the 10's are a tad taller.
 
It's almost dizzying because you can also do the 7317, 2867, 2876, 4460 (fatter) and more (4612 as mentioned)

But I ordered a few, thanks OP!
 
quilbert said:
these good for a 10k oci?
Click to expand...
I do not think Ecogard rates them past 5K miles. Also, most Ecogard standard oil filters I have seen cut open, the nitrile ADBV is usually pretty stiff by 5K miles also.

It is a basic jobber oil filter. 10K is asking a bit much for it IMHO.
 
Ordered/awaiting qty 5 of these for the Odyssey. I’ve got a couple OG XG7317 still, but these ECOGard will keep the Odyssey happy in its later years. Thanks for bringing up this great price on a good filter.

Edit: just received them. Look great. Feel like they are built like a tank. Nice “freshness seal” on the end. Dec ‘23 build date. Feel good about this purchase. Will use and C&P in the future.
IMG_1591.webp
 
Last edited:
Hootbro said:
I do not think Ecogard rates them past 5K miles. Also, most Ecogard standard oil filters I have seen cut open, the nitrile ADBV is usually pretty stiff by 5K miles also.

It is a basic jobber oil filter. 10K is asking a bit much for it IMHO.
Click to expand...
I used a few of these on the Odyssey and all had flexible ADBVs after 5k. I also ran a few on the Toyota and those were still very flexible after 5k.

Maybe some engines (e.g., hotter running or turbo) would cause them to stiffen in 5k?
 
I ran an EcoGard in my Mazda 3 last oil change. Went about 5K. I noted in the oil filter thread I posted of it that the ADBV was stiff. I don't think my Mazda's are hard on oil at all. So, not sure. I don't run them more than 5K. Of course, I don't run anything more than 5K, so YMMV.
 
These okay? Got a couple yellow tagged at $3.
I’m at 50% OLM - plan to swap a quart to HPL Engine Cleaner 30.
Likely just 4k needed on the filter.

IMG_2084.webp
 
You must log in or register to reply here.

Similar threads

J
  • Question Question
Fram 7317 vs EcoGard x4610
Replies
8
Views
644
ZeeOSix
D16A6_Driver
Virgin ECOGARD X4476 C&P
Replies
4
Views
401
EvoMan
BrendanC
Ecogard X4610 C&P
Replies
13
Views
770
ZeeOSix
D16A6_Driver
Ecogard X4476 Cut - 2007 Prius 209K / VRP 5w30 1st run 3000 OCI
Replies
5
Views
280
martinq
D16A6_Driver
Parts Plus PH2876 C&P
Replies
4
Views
264
D16A6_Driver
Back
Top Bottom