Ecogard X2500-B

JTK

$100 Site Donor 2025
Joined
Aug 14, 2003
Messages
16,624
Location
Buffalo, NY
I picked up a bulk pack case of these filters off the eBay machine for ~$29+tax, shipped. I needed something to fill in the gap while I wait for my ~$20 case of ACD UPF63R's from amazon, which is probably never going to happen. They look and feel like a decent filter for the price and I've done some reading up on them on BITOG. They're about an inch shorter than the UPF63's though. I would run these on both my 2021 Equinox 1.5T and 2021 Traverse 3.6L. Maybe even the malibu 2.5L if they fit.
EC4.webp
EC3.webp
EC2.webp
EC1.webp
EC.webp
 
Last edited:
They do say "gold standard quality" on the side. I'm pretty pumped over that.

The box of 12 is just shy of 9 lbs. The seller shipped it USPS from UT to Buffalo NY. The case was tightly wrapped in a bubble wrap type wrapping and arrived in good shape, which is surprising. The seller had to make just about nothing on the deal.
 
Where were those made? I can't see anything on the box or filter photos.
 
I picked up a bulk pack case of these filters off the eBay machine for ~$29+tax, shipped. I needed something to fill in the gap while I wait for my ~$20 case of ACD UPF63R's from amazon, which is probably never going to happen. They look and feel like a decent filter for the price and I've done some reading up on them on BITOG. They're about an inch shorter than the UPF63's though. I would run these on both my 2021 Equinox 1.5T and 2021 Traverse 3.6L. Maybe even the malibu 2.5L if they fit.
View attachment 287311View attachment 287312View attachment 287313View attachment 287314View attachment 287315
See many of them on dodge rams with HEMI at work. No complaints.

Also seeing its cousin the Prime Guard more often too

Nice photos and not a bad price
 
I sacrificed one X2500-B. All these years I've been cutting open my used filters I've never done a new one. It felt wrong. LOL

Seems like a very nicely built filter for a cheap one. I was expecting sloppy glue or uneven pleating. None of that on this one.

EG1.webp
EG2.webp
EG3.webp
EG4.webp
EG5.webp
EG6.webp
EG8.webp
EG9.webp
 
I sacrificed one X2500-B. All these years I've been cutting open my used filters I've never done a new one. It felt wrong. LOL

Seems like a very nicely built filter for a cheap one. I was expecting sloppy glue or uneven pleating. None of that on this one.

View attachment 287494View attachment 287495View attachment 287496View attachment 287497View attachment 287498View attachment 287499View attachment 287500View attachment 287501
Very nice! They should change the name to the “Real Boss”.
 
I sacrificed one X2500-B. All these years I've been cutting open my used filters I've never done a new one. It felt wrong. LOL
Now you can display it on your desk, lol.
 
  • Haha
Reactions: JTK
I did an oil change on my 2021 Traverse yesterday and replaced the ACD UPF63R that was on it with one of the Ecogard 2500's. I cut open the used UPF63R as I do all my filters and I actually like the look of the media can, the bypass valve and ADBV on the Ecogard better. The ACD has a heavier can wall thickness and a heavier base plate, but the media has sloppy pleat spacing, sloppy glue and the barely open slots / louvers in the center tube. I know looks don't show the whole picture however. Just stating what I've seen for those considering either.
 
Back
Top Bottom