Donaldson 551132 4,800 miles CUT OPEN

[53' Stude]

See any white or black smoke off that ADBV in the fire? People dispose of filters too soon after a C&P in case some questions come up.

I didn’t even notice. Next one I run will be on the Dakota sometime before I’m dead. I will do burn test on it. Or I’ll sacrifice a new one and find out.


So, let’s play devil advocate: was it the Delvac doing the cleaning or HPL or both? Car ran/runs great, always lots of power.

 

[53' Stude]

Date code off another one. All same date codes. January 3, 2024

 

[53' Stude]

See any white or black smoke off that ADBV in the fire? People dispose of filters too soon after a C&P in case some questions come up.

Hey Zee: here ya go. Since I have 8 of these left I sacrificed another virgin. It’s definitely nitrile as lots of black smoke. Best pic a 2nd Gen IPhone SE will take

 

[FlyingVan]

Thanks Adam. The nitrile ADBV does not bother me at all. I probably will use some of these after my stash of OG Ultra 3600 runs out. I believe I have 3 left.

I wish Donaldson would make a filter in the 3600 size with the same efficiency like this one (I believe 99% at 17 microns). That would be what I like. A 3614 works good, but bigger is better, right? Lol.

 

[OVERKILL]

Good looking filter! Is there a Synteq version of this can do you know?

 

[53' Stude]

Good looking filter! Is there a Synteq version of this can do you know?

I am not sure I will Google this. Well I can’t find it or dunno if it’s different part #

 

[53' Stude]

Thanks Adam. The nitrile ADBV does not bother me at all. I probably will use some of these after my stash of OG Ultra 3600 runs out. I believe I have 3 left.

I wish Donaldson would make a filter in the 3600 size with the same efficiency like this one (I believe 99% at 17 microns). That would be what I like. A 3614 works good, but bigger is better, right? Lol.

I like this Donaldson filter. I’m still amazed at what the Delvac ESP purged by that big glob in can.

 

[scoot]

I wish i would have left it on for another 4-5k. But I have enough of these and 7 OG ULTRA’s to last me til either body falls off or…..

It could probably go 25k being a rock catcher .

 

[53' Stude]

It could probably go 25k being a rock catcher .

You think this is a rock catcher?

 

[FlyingVan]

Rock catcher? I hope you are not serious. With 99% at 17 microns this is one of the best filters out there.

 

[Urshurak776]

Nice work! I have always said no louvers for my vehicles, but if i had to use one it would be this. Nice looking filter. Doubt they make them for my Mazdas.

 

[gasman556]

I am not sure I will Google this. Well I can’t find it or dunno if it’s different part #

If you come up with a way to find these using thread pitch, etc please post it.

I’ve got some other equipment to get filters for! Haha

 

[scoot]

Rock catcher? I hope you are not serious. With 99% at 17 microns this is one of the best filters out there.

Rocks come in all shapes and sizes.

 

[53' Stude]

If you come up with a way to find these using thread pitch, etc please post it.

I’ve got some other equipment to get filters for! Haha

This filter is 3/4 by 16 thread

 

[OVERKILL]

I am not sure I will Google this. Well I can’t find it or dunno if it’s different part #

Sorry, this IS the Synteq version, I apparently was having a stroke and was looking at the P502007 that Brandon posted and discussed with Zee, not the P551132 you ran, which is much higher efficiency (99% @ 17 microns, Synteq media).

 

[53' Stude]

Very good OVERKILL. Thank You