Black "goo" on copper

Joined
May 14, 2026
Messages
8
I have a copper material that has a black "goo" on it. I have sent a sample into a material lab and the information comes back as a carbon, oxygen, silicone material. I have used mineral spirits on it and that removes maybe 70% of the goo but not all and then the spirits are full and no more cleaning effect ,also, new spirits do not remove the rest of the goo.
Now, I have also use m.e.k nothing, used a Turpin tine -, nothing, laquer thinner - nothing. All these approximate time in dwell about 5 hours

I tried a product called la awesome, this product did shrink the goo but not "eat" or clean without rubbing action. This stuff is also kinda soapy.

Any other thoughts?
 
Hmmm......."a copper material" is suspiciously lacking in specificity.
Is it a part of something or a bit of material awaiting purpose?
Did it develope this goo in or near water?
 
I have a copper material that has a black "goo" on it. I have sent a sample into a material lab and the information comes back as a carbon, oxygen, silicone material. I have used mineral spirits on it and that removes maybe 70% of the goo but not all and then the spirits are full and no more cleaning effect ,also, new spirits do not remove the rest of the goo.
Now, I have also use m.e.k nothing, used a Turpin tine -, nothing, laquer thinner - nothing. All these approximate time in dwell about 5 hours

I tried a product called la awesome, this product did shrink the goo but not "eat" or clean without rubbing action. This stuff is also kinda soapy.

Any other thoughts?
what is this copper?

wire, pipe?
 
Hmmm......."a copper material" is suspiciously lacking in specificity.
Is it a part of something or a bit of material awaiting purpose?
Did it develope this goo in or near water?
This material is by itself. I believe the goo is out there by the manufacturing process
 
Silicone or silicon? Many people confuse the two. Silicone cannot be remove with common solvents. It must be wiped away. I worked in a lab that used silicone on the instruments that needed to be cleaned after every use. Silicone grease was a pain to remove.

Was EDS (Energy Dispersive Spectroscopy) used to analyze the material?
 
Back
Top Bottom