I have a set of ear muffs that became loose where they ear muffs mount to the head set.
I had an old tube of Ultra Black. Once cured it stays flexible. Unfortunately it sets up in the nozzle after time but a 7/32 drill bit can be used to drill it out and get to the good stuff. I wiped the nubbins of the ear muffs with 70% alcohol and put a dab of Ultra Black on. I let it cure for two days then snapped the ear muffs into the head set. They still allow movemet to fit perfectly.
I had an old tube of Ultra Black. Once cured it stays flexible. Unfortunately it sets up in the nozzle after time but a 7/32 drill bit can be used to drill it out and get to the good stuff. I wiped the nubbins of the ear muffs with 70% alcohol and put a dab of Ultra Black on. I let it cure for two days then snapped the ear muffs into the head set. They still allow movemet to fit perfectly.